Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

New entertainment Center

Posts

New entertainment Center

#1

New entertainment Center

Dave Tenney

>I just finished this up last weekend...Those flush mount drawers are a pain in the butt. All sugar maple finished with seven coats of Behlens rockhard thinned out and wiped on. I'm still working on my brushing technique, which is probably the best way to put this stuff on. Took me about two weeks to build this. The whole thing is biscuited together and has no metal fasteners. Not fine furniture construction, but probably good enough for a TV stand. This thing weighs a ton!

I made the speakers five or six years ago...

Dave


img

Re: New entertainment Center

#2

I meant to post this on the other side...

Dave Tenney

>

Re: New entertainment Center

#3

Nice looking cabinet

Ellis Walentine, Host

>I like Spartan lines like this. It has a sort of neo-Shaker feel to it. By all means post it on the Messages board too.

Ellis Walentine, Host

Re: New entertainment Center

#4

No worries Dave... We have biscuts all the time!

Scott Burr in Ben Lomond, CA

>With eggs ans sausage! I'd love to hear something about your speakers...

Nice folded horns!?!

Re: New entertainment Center

#5

Re: No worries Dave... We have biscuts all the tim

Dave Tenney

>The speakers are Fostex FE166 full range drivers. The cabinets are basically the factory Fostex design with a a couple of changes for asthethetic reasons.

Here is a link to the speaker and the plans:

http://www.madisound.com/catalog/product_info.php?cPath=45_241_310&products_id=270

It took me about 100 hours to build those, but a lot of time was spent laminating the walnut to the edges of the plywood. The plywood by the way was the cheap Chinese crap from Lowes and was particularly miserable to work with.

And they do sound exceptional. Full range drivers are known for their holographic stereo imaging. The bass response is also very good, and most people can't believe how much low end these thing can produce while barely moving the speaker cone. I use these with an old 15W receiver that powers them with no problem. Since I am using a Solid State amp, I have a filter that consists of a 4uH inductor paralleled with a 8 ohm resister inside the cabs which gives them a little boost in the low end from 400Hz down. I have a neighbor with a speaker testing rig that measured these for me a few years ago and they were very close to a flat response.

Overall, a really fun woodworking project!

Dave

Re: New entertainment Center

#6

Thanks, Dave!

Scott Burr in Ben Lomond, CA

>I've built a few pair over time. Wow that's a folded horns yes?

You must have a good neighbor(do you live Santa Fe?).

Why not crap chinese MDF instead? You were veneering anyway...

Thanks for the reply!