Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Handyman Club of America

Posts

Handyman Club of America

#1

Jack Guzman from Maine

Handyman Club of America

Jack Guzman from Maine

>I usually toss most of the junk sent from the Handyman Club of America.But I always figure those plastic drill size guides may be useful at some point and they don't take up much space.Until today that is. I needed a 1/8" bit to apply some hardware so I checked the bits on some of my eggbeaters with the guide.Nope,the closest I had was 7/64.I rummaged in my bit box,nope,no 1/8 but a couple more 7/64.So I went to a brand new 1/8 bit and checked it just for laughs. Ah-ha! 7/64.So I checked against another gauge.!/8.The guide is inaccurate.What good is that?I think from now on when I get one of those mailings I'll just toss the unopened package.---Jack

Re: Handyman Club of America

#2

Re: Handyman Club of America

Bill Houghton, Sebastopol, CA

>I tried a "membership" for a while. They sent me a device intended for close quarters nailing: a weight on a rod, sliding in a tube. The tip wasn't magnetized, so you had to hold the nail in place somehow, position the tube, etc. It needed about three hands. I critiqued it as earnestly as possible. Never heard another word (and I've never seen the product advertised).

I've still got the weight on the rod; if/when I get the wood lathe in my storage shed set up, it'll make a great center remover.

Re: Handyman Club of America

#3

Not for drill bits ! . . .

steve mackay

>Stands for 1/8th recomended daily allowance (FDA approved) of pasta.

Re: Handyman Club of America

#4

My Wife is a Member

David Miller from Iowa

>My wife got a contractors card at Menards when we were building a house - next thing you know she was a fully enrolled, card carrying member of the Handyman's Club. Irked us both, me because she can't pound in a nail, and her because she thinks it is sexist - should be Handyperson's club.

Re: Handyman Club of America

#5

Re: My Wife is a Member

Stuart Hough

>A cow-patty by any other name still stinks, as does that club. I, sorry to say , was duped by the promises of "free contractor-quality tools" into becoming a Life Member. The $395.00 value in free startup premiums wasn't worth $3.95!

Re: Handyman Club of America

#6

Re: Handyman Club of America

Tom MacGregor

>You were testing the wrong kind of drill bits. Go to the local flea market and find the guy with 12 folding tables of bins of unbranded tools. Look between the 2 mil thick blue tarps and the 3-packs of assorted dental picks. Buy one of the 115 piece sets of titaniozirconiacarumbide coated bits as seen on TV for $19.95. The sizes will match the Handyman Club gauge.

Re: Handyman Club of America

#7

It is good for one thing...

Scott Burr in Ben Lomond, CA

>measuring pasta size or servings...