That should be "do we impact"
Pam Niedermayer, Austin, TX
>
Knowledge You Can Build On — Est. 1998
That should be "do we impact"
Pam Niedermayer, Austin, TX
>
Re: I was looking at the snow on the hillsides
Bob Demers
>Its all relative.. to where one look :-)
Notice also, that im a blend snowworker, I uses both hand and p'wr tools :-)
Bob, woodworking frozen boards, where cryo edge treatment is routinely done when one drop a tool on the ground :-)
A true "Canadian" comment...
Rob Lee
>Hi Bob!
Can't help but notice your snow shovel.... it it a Melnor? Model #37 perhaps??
From the wear pattern on the edge - it looks to be about 10 years old...and if it's worn that much - it must be a favorite!
Reason I ask is I just wore out mine - and replaced it with a crappy metal handled/metal edged verison (from a different maker) - and the handle bent on the first use - when the metal edge caught on something....what a piece of junk!
I think I'm going to see if Melnor will put 'em back into production - even just for us.
Anyhow - if you could pull any maker info off your shovel - I'd appreciate it.
I suspect there're a lot of Canadian woodworkers who spend more time with their snow removal equipment than they do in the shop.... and a good shovel makes a difference....
Cheers -
Rob
(who shovelled twice yeterday)
Re: A true "Canadian" comment...
Brent Smith, Montreal
>"and a good shovel makes a difference"
You've got that right Rob!!!!! I've gone through 3 shovels over the last 2 winters, and the one I'm using now is headed for the dump soon. I'm leaving it in your hands to pick my next shovel because I sincerely hope to buy it from Lee Valley, and know I'm getting something that will last past a couple of snow storms.
Re: A true "Canadian" comment...
Bob Demers
>Yes, and how about putting racing stripes on it so it will appear to make shoveling faster! :-)
Bob, the frozen jokester, dreaming of a Binford 2000 shovel arg arg arg
Re: A true "Canadian" comment...
Paul Kierstead
>I recently bought a metal bladed one at CT. It has a "carbon fibre" (*) handle or the like, which actually is nice,light and strong. However, the blade is exceedingly flimsy and doesn't work well at all; I fully expect to destroy it this winter. A sorry state of affairs. Most of them had plastic blades, which doesn't let you scraped down the same way at all. How do we end up in a situation where you can't buy a single good quality shovel? Surely not everyone just wants to buy the cheapest (or most gadgety in the case of mine) shovel?
(*) I put it in quote since I have my doubts about how much carbon fiber there is, but still, it is admittedly a decent handle. So far. It will outlive the blade in any case.
Re: A true "Canadian" comment...
Bob Demers
>Paul
I had a carbon fiber handles one before, an ergonomic handle at that.
Althought I liked the shape and found it easier on my back, it was a flimsy affair how it attached the handle to the plastic business end.
Because of it, it did not survived long, I tried to salvaged it but could not do much to secured it properly, then the plastic shovel part broke. All in all, it was an expensive POS.
The one I got now, featured in my earlier post, has been around for about 5 years now. The robust ash handle is only secured by one screw, but it is solidly held in a deep socket (like a socket chisel)
The metal edge did not last long, it corrode, and broke off about 2 winters ago, but the plastic edge is seemingly tought!
I mercilessly pound on ice with it, and so far, both the handle stay on solid, and I havent crack the plastic end yet.
The edge shows lots of wear, as pointed out by keen eye Rob, and the plastic part shows lots of stress marks (whitetish discoloration of the blue plastic) but amazingly it has survived my best effort to kill it so far. But I suspect its days are numbered, judging by the stress marks alluded earlier.
The markings on the handle have long dissapeared, but I suspect it is a Garant. Most of my gardening tools and shovels have been Garant for years. But It could be Melnor like Rob says. I suspect he knows his hardware stuff better than me :-)
Bob, the reluctant snow removal expert
Certainly a snow country comment
Bill Houghton, Sebastopol, CA
>I went back and looked at the picture, and I sure can't see all the subtle condition and wear clues you folks picked up. Guess you have to live with it daily to learn these things...like when I could see subtle paint color shifts across the hood of the old Cadillacs ("old" as in early 1970's; "old" as in the hood was large enough to build a 2000 sq. ft. house on) during my short career as an auto detailer, a skill I have long since lost, using the freed-up brain capacity for the skills needed for spotting interesting tools at garage sales.
Bill, back from a Saturday morning out garage saling with my sweetie. Her day more than mine - I got an interesting piece of hardwood and three picture frame clamps.
Not an issue
Ellis Walentine, Host
>I have a dedicated server with no limit on transfers. We can pretty much do what we want with file sizes and monthly transfers. Out of courtesy to the folks who still have slower connections, it's good to be conscious of file size. That's why I still have our messageboard photo limits set to 80Kb.
Ellis
Thanks.
Pam Niedermayer, Austin, TX
>