Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Newest issue of "Woodwork" arrived

Posts

Newest issue of "Woodwork" arrived

#1

Newest issue of "Woodwork" arrived

Bill Houghton, Sebastopol, CA

>and I felt pretty good. I think the new editor understands what's been important about it and, if anything, has revitalized it.

In his editor's note, he encourages readers to contact him with feedback, including his e-mail address in the note. I did, and he was quite responsive. I just finished sending probably a page (if printed out) of comments.

Whew! I'm glad to see it didn't turn to trash.

Re: Newest issue of "Woodwork" arrived

#2

and Fine Woodworking

David Cockey

>I'm pleasantly surprised by Woodwork. Looks to have more content than recent issues. I'm starting with the article on building a 17th century carved box by Peter Follansbee. Then I'll read about building wood screw clamps and using molding planes. And that's only a fraction of the articles.

Fine Woodworking also arrived today. I quickly glanced at it but put it aside until I'm finished with Woodwork. Does look to have a couple articles of interest. FW now ranks fourth of the four woodworking magazines I read. Tied for first are Woodwork and Woodworking, closely followed by Popular Woodworking.

Re: Newest issue of "Woodwork" arrived

#3

Bill, I have to agree

Kevin Adams

>I was frankly surprised to see it looks pretty much like the old Woodwork that I had come to love. The article by Peter F. is a winner in particular. I have a business trip next week so have saved it for the plane ride...

Kevin

Re: Newest issue of "Woodwork" arrived

#4

Re: Newest issue of "Woodwork" arrived

James Watriss

>I'll wait a few issues before deciding. Publication pipeline can be a few months long.

Re: Newest issue of "Woodwork" arrived

#5

Re: Bill, I have to agree

ThomD

>I hope it isn't just going to fall into the ye olde vain a number of magazines have assumed. Nothing wrong with that, but it is being well covered at the moment. What risks being missed is contemporary woodwork at the highest level. We have a lot of ye olde; projects; how tos if yo have never held a saw, etc...

Re: Newest issue of "Woodwork" arrived

#6

Re: and Fine Woodworking

Marv....... Northern California Lake Co.

>Hi David,

Did you get my email regarding larger backsaws?

Thanks,

Marv

Re: Newest issue of "Woodwork" arrived

#7

Not me...

Scott Burr in Ben Lomond, CA

>I'm looking forward to it (I think, I hope) but thanks for the head's up it coming.

Re: Newest issue of "Woodwork" arrived

#8

Me neither

Dan Moening in Sacramento

>...but the mail doesn't get here for another hour.

Now I'm anxious.

:-)

~Dan.

Re: Newest issue of "Woodwork" arrived

#9

Re: Newest issue of "Woodwork" arrived

John Anianbo - reading in NJ...

>Bill, et. al.,

If they can get one article by Peter Follansbee in every other issue, it would be worth the subscription cost...

John

Re: Newest issue of "Woodwork" arrived

#10

Re: Newest issue of "Woodwork" arrived

Bill Houghton, Sebastopol, CA

>Yes, I like his article too. Actually, I don't think there was a clinker in the whole issue. The new editor has set himself a high standard.

Re: Newest issue of "Woodwork" arrived

#11

anyone have subscription information?

Scott in Montana

>I briefly searched and came up with no website. Upon all of your kind words and reccomendations, I'd like to subscribe.

Scott in Montana

Re: Newest issue of "Woodwork" arrived

#12

Re: anyone have subscription information? *LINK*

Bill Houghton, Sebastopol, CA

>They've been VERY slow to get their website up. They're owned by New Track Media (scary, slick-sounding name, but their stable of magazines is a pretty strong one): link below. Their contact e-mail has been pretty responsive, and they also list a phone number.

Bill, no affiliation except long-time subscriber and they published a piece of mine and one or two tips, all years ago; and they used to be a local magazine (publisher half an hour south of me), but no longer


New Track Media home

Re: Newest issue of "Woodwork" arrived

#13

Re: Newest issue of "Woodwork" arrived

Richard Jones

>Bill,

Is this the issue with the draped clock on page 56? Some of the stuff in that gallery is a bit bizarre, to say the least. I wasn't very impressed with some of the pieces the editor chose for the mag. All in all I wasn't impressed with a lot of it, guess I'm just the odd man out.........

Rich

Re: Newest issue of "Woodwork" arrived

#14

Thanks Bill!

Scott in Montana

>

Re: Newest issue of "Woodwork" arrived

#15

One of the joys of this woodworking thing

Bill Houghton, Sebastopol, CA

>is that everyone's mileage varies, and the result is a lot of interesting work.

Re: Newest issue of "Woodwork" arrived

#16

Amen, my friend

Richard Jones

>

Re: Newest issue of "Woodwork" arrived

#17

Not for you

David Cockey

>Sounds like Woodwork isn't a magazine for you. I've been reading it for a number or years and it's contents have always been somewhat ecletic with a significant amount of studio furniture / wood art. But it else has articles on very traditional woodworking such as the Peter Follensbee one and articles on woodworking schools such as the one on the boastbuilding school in Sweden.

So if it's not for you please don't subscribe and then complain about the contents. There are lots of other choices out there.

Several years ago on a forum several folks were refering to Woodwork as a "leftwing" magazine. Interesting.

Re: Newest issue of "Woodwork" arrived

#18

They must have meant "LeftCoast"

Bill Houghton, Sebastopol, CA

>It was one of the few wood magazines published on the West Coast, though I wouldn't have described Novato, its home base, as exactly a hotbed of lefties. I'm kind of sad that it's moved to the Midwest.

Re: Newest issue of "Woodwork" arrived

#19

Re: They must have meant "LeftCoast"

David Cockey

>My recollection is the several posters considered Woodwork to be almost subversize and definately "left-wing liberal". The previous editor's editorials could be a little bit preachy and "green". But I suspect the real cause of the sentiments was that some of the woodwork shown was "unconventional" as were some of the woodworkers. I hope they keep it up.

Re: Newest issue of "Woodwork" arrived

#20

Re: Not for you

Richard Jones

>David,

<> Probably not, but that's a decision that I'll make.

<> Isn't that a bit of Catch-22? My money buys me the right to complain if I so choose, but in all honesty, I didn't think of it as complaining, only pointing out something about the so-called "art". Are you saying that everything in the magazine is above criticism?

<> You mean Woodwork isn't the only one?

<> At the end of the day it's just a magazine written about and by people that put their pants on one leg at a time. I'm sure there are those that say this forum is (fill in the blank here), but I don't let others do my thinking for me.

Rich (it's been a long day) in VA

Re: Newest issue of "Woodwork" arrived

#21

Re: Newest issue of "Woodwork" arrived

Pam Niedermayer, Austin, TX

>Thanks for the heads up, Bill, subscribed today, will give it a year. I loved this rag and subscribed a few years ago; but the mechanics of subscribing started feeling very cumbersome.

Pam

Re: Newest issue of "Woodwork" arrived

#22

Well, I receivied mine yesterday...

Scott Burr in Ben Lomond, CA

>All I have to say is ITS GREAT! No large changes the good good VS evil WW talk. Great pics of peoples work, I, I really do read the articles...

I really do!!!

Why don't you believe me!?! You do believe me !?! Yea?????????

Re: Newest issue of "Woodwork" arrived

#23

Re: Newest issue of "Woodwork" arrived

Hal B.

>I wonder why they went to only four times a year? Six seemed right.

Re: Newest issue of "Woodwork" arrived

#24

Four vs. six

Bill Houghton, Sebastopol, CA

>I think the editors recognize that "Woodwork" lives in a somewhat rarefied niche, and decided to cut down to fewer issues to ensure that they'd have enough quality articles.

Re: Newest issue of "Woodwork" arrived

#25

Re: Page 56

ThomD

>Rich,

"Is this the issue with the draped clock on page 56? Some of the stuff in that gallery is a bit bizarre, to say the least."

One thing is that this was an article on a gallery. They are choosing the work for inclusion in the magazine through a filter of an article on a national institution covering studio furniture. Different mater than presenting the material as a piece they have chosen to feature for their own reasons.

If you know the maker, he has a long tradition in our community including a book on his stacked furniture method (personal yuck on that style) that was influential with other makers, and showed all his techniques. A guy who has been a shop teacher if I recall, but got out there and sold stuff also. He then proceeded to very fancy Ruhlman based furniture, and I guess this is some more recent stuff. I have lost touch.

So the basic issues are:

- Should a woodworking mag ever cover a gallery: A lot do.

- Should they choose a range of representative work, including irritatingly pretentious stuff, which certainly was, and probably still is part of the scene?

- Should they feature a maker with a strong following among clients, who is also well known to woodworkers?

I have to say that pic was a groan for me too, but I was interested because I have followed the maker. I am not against this kind of thing, but I does have problems for me.

- One is it is often exceedingly trite.

- Apparently it sells, which is good. Any piece that has a chance of being marketed may have to curtsey to the market somewhat. When one gets into this kind of thing the bowing appears to be lower than usual.

Just my random thoughts.