rose wood for handles
Wayne Carson
>what kind of rose wood was used on Stanley planes
Knowledge You Can Build On — Est. 1998
rose wood for handles
Wayne Carson
>what kind of rose wood was used on Stanley planes
Re: rose wood for handles
Bob Demers
>Wayne
Im not sure what Stanley used, havent found a reference on that,but here is what David E. Heckel has to say on Sargent planes of a similar era and quality
Extract from his book: Sargent planes identification and value guide second edition, pg 7 para 3
There has been much discusion on the source of the wood used for knobs and handles on Sargent planes. The wood East India Mahogany used on most VBM era planes is soymida febrifuga. This hardwood from the forest highlands of eastern India is hard, close grained, very dark red-brown, and has many fine concentric lines of lighter color. It is also known as Indian Red Wood. Others have called it Padauk, pterocarpus soyauxii, but it is not Padauk, because Padauk has interlocked grain, where as East India Mahogany does not. After the VBM era, Sargent then used Honduras Mahogany, swientenia macrophylla, for the plane knobs and handles. This wood is soft and breaks easily with the grain, which accounts for the abundance of chipped or broken off handle horns on Sargent planes of that era. The early catalogs listed Rosewood, dahbergia nigra, for the knobs and handles and Sargent used high quality, nicely grained stock to make the knobs and handles.
I suspect, Stanley and others of that era used similar woods, judging from the examples I own. In case you dont know Sargent VBM era refer to 1908-1918
Hope this help
Bob
Wayne don't waist your time...
Scott Burr in Ben Lomond, CA
>The rosewood Stanley used is long gone. Sorry I don't know the verity off the top of my head but I believe it was Brazilian.