Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

A Chairmaker's Travisher question

Posts

A Chairmaker's Travisher question

#1

A Chairmaker's Travisher question

Glenn Madsen near San Francisco

>I'm four classes into building my first Windsor chair at the Adult Ed center. This is not only my first Windsor, but my first chair.

The instructor has a travisher he got when he took a class years ago, in Great Britain, I believe. And there are a few here who would like to build one each for our own toolkits. Well, some would like to buy one for speed. For now, I've shaped my chairseat with other tools (think DeWalt Angle grinder and 50 grit), but there are more chairs to build, and the Galoot gods to satisfy, when speed isn't so required.

Anyone have any ideas as to sources for blades for these things? The one we have looks like a LARGE rounded bottom spoke shave, except that the rounding is side to side, not front to back, like a cigar shave would be. Maybe a 4" radius, and maybe 40% of a circle on the blade, which is perhaps 3/8" to 1/2" wide. This is from foggy memory right now.

Google has not yielded anything yet for a blade supplier. Travisher suppliers seem to point to a Carribean supplier that sells through Highland Hardware. Highland indicates that these are made to order, so order with plenty of lead time.

Thoughts?

I'm going to build a bead scraper for now, for chair one. But one of these for chairs two through two dozen might be nice. Maybe another 5 or 6 from this class, too.

Re: A Chairmaker's Travisher question

#2

Re: A Chairmaker's Travisher question *LINK*

Pam Niedermayer, Austin, TX

>Sure, Country Workshops have travisher blades, as well as most any other tool you'd need for chair making, very high quality.

Pam


Country Workshop Store

Re: A Chairmaker's Travisher question

#3

What Pam said, and... *LINK*

Scott in Douglassville, PA

>...whatever you do, don't buy a travisher! They're surprisingly easy to make.


My travisher...

Re: A Chairmaker's Travisher question

#4

Well, shoot, Glenn...

Scott in Douglassville, PA

>I looked at Counrty Workshops' site, and they don't sell the travisher blades (the useful ones, anyway) anymore. Sorry 'bout that, and I'm sorry to see the loss of a good supplier.

In the meantime, there's Lee Valley's pull shave (hardly traditional, but you might want to try). Maybe try to hook up with a metalworker or blacksmith and see if you can't have an iron or three made. I'm sure folks around here (myself included) could come up with numbers for an order. If you need measurements/pictures of mine, lemme know.

Scott

Re: A Chairmaker's Travisher question

#5

Re: Well, shoot, Glenn...

Glenn Madsen near San Francisco

>So the blades shown in Pam's link are either 1) wrong, or 2) not available or 3) something else? Darn.

Some of the LV stuff is being used in the class, and it works. I have a couple three shaves, and there are a few scrapers of various types. But buying a $100 tool, no matter how nice, seems a bit out of character for making eighteenth century chairs...

Thanks for looking.

Re: A Chairmaker's Travisher question

#6

Re: Well, shoot, Glenn...

Scott in Douglassville, PA

>They used to have a number of different sweep radii for the travisher irons. Now it looks like they only have the 3/32" sweep, which t'ain't much of a curve. Mine was something like 3/8" sweep - model BD-11. Might could call and see if they have any others?

Agree with you on the purchasing of new tools for chairmaking. I bought my scorp and adze new, and it hurt. My froe, OTOH, is ugly, pitted, and old. I love it... :-)

Re: A Chairmaker's Travisher question

#7

Re: A Chairmaker's Travisher question *LINK*

Greg B�tit, Crown Point, NY.

>Well shoot. If Drew stopped supplying travisher blades, that's a sad thing. Crown Plane sells a travisher. It was designed by Mike Dunbar of the Windsor Institute.

I like the Lee Valley pull shave. I haven't used it as much as the travisher, but it seem pretty nice, capable of doing the same stuff, only differently.

Harris tools also makes a travisher. They also sell replacement blades. http://www.harristools.com/catalog/product_info.php?products_id=112

I have one of Harris's travishers, but like my Crown Plane one a little more.

greg


crown plane

Re: A Chairmaker's Travisher question

#8

Re: A Chairmaker's Travisher question *LINK*

LRSmith in NC

>You might want to read what Peter Galbert has to say about travishers on his "Chair Notes" blog. Scroll down on the link below to the Monday 7/23/2007 entry. A very good site with lots of good info from a working chairmaker willing to share his knowledge.

It seems all of the travisher blades are coming from England and unless you buy in sufficient quantity it's not worth their time. Elia Bizzarri (handtoolwoodworking.com) and Jim White (crownplane.com) both make travishers, I don't know if they sell blades individually but you can sure ask them.

Good luck as you drift away from straight, flat and square woodworking.

lynn


"Chair Notes"

Re: A Chairmaker's Travisher question

#9

Re: A Chairmaker's Travisher question

Jim Crammond in Monroe, Mi.

>Glenn,

I've made three travishers including the blades at a class offered by John Wilson in Charlotte, MI. It is a fairly simple process and takes 2-3 hours for the blade part. The whole travisher takes about 7-8 hours. Each of the ones that I have made have a different radius for the curve of the blade. I have been very satisfied with the way that they work.

If you are interested in giving it a try, I'd be happy to answer any questions that you have.

Jim

Re: A Chairmaker's Travisher question

#10

Re: A Chairmaker's Travisher question

Pam Niedermayer, Austin, TX

>That Crown travisher looks exactly like a used one I bought from the Old River guy. I thought the handles were too short, it was very hard to pull. I take it that hasn't been your experience?

Pam

Re: A Chairmaker's Travisher question

#11

Re: A Chairmaker's Travisher question

ThomD

>I used the blade Drew used to sell. Even if it isn't on his site, it can't hurt to ask him. You never know. I got my guttering adze unhandled form him also. That was a huge sawing over buying the finished tool.

I don't really get the travisher. Seems like a perfect place for a curved plane. cheaper and easier to make as far as I can tell. The guy I took a windsor class from, Dunbar trained, used the crown plane first, then the travisher. Kinda seemed backwards to me, I guess it just so happened his travisher was more finely set than the plane. But I would hand plane a surface, then polish it up with a spokeshave. It seems as though a plane with a finer mouth would have been just as useful.

Re: A Chairmaker's Travisher question

#12

Re: A Chairmaker's Travisher question

Greg B�tit, Vergennes VT

>I don't think that travisher handles are used very much. I hold the body of the tool as low as I can, which I believe is what most people do. I looked for a picture from one of my chair classes to show this, but I couldn't find one.

I've never thought of this before, but a handless travisher design might be better. The handles go up so that the tool will fit in the bowls it is smooting. If we don't use them, would the tool be better if they were out of the way? Hmmm.

The design of the Crown Plane travisher was the result of a corroboration between Mike Dunbar and Leon Robins, starting with an antique travisher Mike had.

greg

Re: A Chairmaker's Travisher question

#13

Travisher handles...

Scott in Douglassville, PA

>As of a few years ago, Jim Rendi was using one of the spoon bottom shaves with even further shortened handles, and he had a homemade "travisher" from an old Stanley spokeshave that he hacked the handles off of and filed the sole round. Didn't use that one, though.

Further evidence for eliminated, or at least shortened-armed travishers: The one made by Windsor Workshop, and the weird one made by Elia Bizarri (based on Peter Galbert's).

Having said all that, I like the traditional shape, for aesthetics, if for no other useful reason. Usually, you don't hold the handles in use, and with the traditional shape, they're up and out of the way. Occassionally, though, when taking a skewed cut, I hold one of the arms, so they're not entirely unused. But I don't like the aesthetics of the newer designs nearly as much. Can't speak to how they work. YMMV.

Re: A Chairmaker's Travisher question

#14

Re: Travisher handles...

Pam Niedermayer, Austin, TX

>Sure helps to know how to use a tool, thanks guys.

Pam

Re: A Chairmaker's Travisher question

#15

Re: A Chairmaker's Travisher question

Glenn Madsen near San Francisco

>"Good luck as you drift away from straight, flat and square woodworking."

What makes you think that my work has been straight, flat and square? ;-) I came from a ceramics background. Everything fired to Cone 10 is approximate.

Re: A Chairmaker's Travisher question

#16

Re: A Chairmaker's Travisher question

Glenn Madsen near San Francisco

>Is John Wilson the Shaker Box fellow? I'd heard of him, but didn't get a hit on his shop for tool parts. Let me see what I can raise there.

Thanks!

Re: A Chairmaker's Travisher question

#17

Re: A Chairmaker's Travisher question

Glenn Madsen near San Francisco

>His website indicates that the selection is waning, but I'll check with him. If I can find a blade set, I think I'd like to build one.

I cheated on this chair seat and used a DeWalt Angle grinder and 50 grit sanding disk, followed by a sweep and a detail sander. NOT the traditional manner, and not what I want to do again. The grinder is really too fast.

Re: A Chairmaker's Travisher question

#18

Re: A Chairmaker's Travisher question

Jim Crammond in Monroe, Mi

>Glenn,

Yep, that John Wilson. He holds classes about tool making several times a year, they should by listed on his website. I think the website is shakerovalboxes.com or something pretty similar.

I've made a couple of spokeshaves, a bowsaw and the travishers under John's and Gil Chesbro's tutelage. The classes usually fall sometime around my birthday, so I consider taking the class a birthday present to myself. It is always an enjoyable way to spend a day.

Jim

Re: A Chairmaker's Travisher question

#19

Re: Well, shoot, Glenn...

Paul M.

>As much as I love Lee Valley, I was not very impressed with their pullshave. I was able to do a side-by-side with a Travisher and this pullshave, and I just like the feel of the Travisher. I think the wrist action pushing away from you that the Travisher allows gives me more control than the pullstroke of the pullshave. Just my opinion!

Re: A Chairmaker's Travisher question

#20

Re: Well, shoot, Glenn...

Greg B�tit, Crown Point, NY.

>With a chair seat held vertically in a leg vise (mine is ~8" higher than the bench top) the pull shave is pretty nice. I'm talking about pulling down with the grain. Between an inshave, compass plane and travisher, I wouldn't call it essential. But it would suffice if an inshave and the pullshave were all you had, perhaps followed by a real sharp French curve shaped scraper.

greg

Re: A Chairmaker's Travisher question

#21

Re: Travisher handles... *LINK*

Mike Hamilton

>For roll your own, Elia's look pretty straight forward. No tangs, just curved steel screwed to the handle. Hilton Handcraft also has a web page on making your own - slot and screws holding the tangs, minimalist interpretation of the traditional shaped handle.

Regards,

Mike


Hilton's roll your own page

Re: A Chairmaker's Travisher question

#22

Very cool or should I say hot site. THANKS!

Scott Burr in Ben Lomond, CA

>

Re: A Chairmaker's Travisher question

#23

Kind of reminds me of a drawknife I saw once

Bill Houghton, Sebastopol, CA

>Went to a garage sale, and this guy was making rustic chairs. His drawknife was a rotary mower blade, cut to length with an acetylene torch, with handles welded on. Ugly as sin, but seemed to work.

Re: A Chairmaker's Travisher question

#24

Re: I Found a potential blade!

Glenn Madsen

>Harris Tools shows a replacement blade kit! At least on their website, there shows one. I'll need to give them a message or a call tomorrow!