Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Woodwork magazine - reading the tea leaves

Posts

Woodwork magazine - reading the tea leaves

#1

Woodwork magazine - reading the tea leaves

Bill Houghton, Sebastopol, CA

>So, I got a notice today encouraging me to renew my subscription (I'm three away from the end). Woodwork is now described as containing "...project plans and ideas for every skill level, expert techniques, feature articles on talented woodworkers, and our eye-opening Gallery section."

The first phrase concerns me - "every skill level" could mean frightening junk.

I'll try to reserve judgment until the next issue, supposed to mail the first week in February.

Can y'all tell that I'm going slowly crazy here as I recuperate from surgery?

Re: Woodwork magazine - reading the tea leaves

#2

Re: Woodwork magazine - reading the tea leaves

Glenn Madsen near San Francisco

>Well, if they get EVERY skill level, then there's hope. Other magazines miss the 'intermediate to expert' skill levels quite frequently.

Keep us informed, please.

And take care of yourself, too.

Re: Woodwork magazine - reading the tea leaves

#3

Re: Woodwork magazine - reading the tea leaves

Bob Entwisle in NJ

>Hi Bill,

Glad you're surgery went well, and that you are in fact recuperating, but I'm sure it is mind numbing at times.

I sure hope Woodwork doesn't turn into yet another repository for 'Arts and Crafts Bookcase in a Weekend' plans.

Bob in NJ

Re: Woodwork magazine - reading the tea leaves

#4

Re: Woodwork magazine - reading the tea leaves

ThomD

>Good to see you are looking ahead Bill.

Every skill level doesn't have to mean banal junk. There is lots of very beautiful stuff that is easy to make, and there is horendous kitch that is difficult to make. Case in point NYW had an episode (I watch the intros) in our broadcast area today of a side table with a clover leaf top and a triangular shelf. My wife and I each looked at each other and it sent memories of dead grandparents basements up and down our spines. Yet quite a lot more difficult to make than say a tressle coffee table, or any table George Nakashima ever built.

None the less I share your apprehension. I'm pretty much against projects on priciple. I prefer to design my own stuff, and even where I copy I don't need monthly magazines full of projects that I will never build and have no space for. FWW used to be project free, and was far more interesting at that time. Most magazines are designed like Bride magazine - They don't expect most people to last as subscribers more than a year or two, and just cycle the same pap over and over. That didn't used to be FWW, and some others I can think of. The only magazine that has stuck it out in any of the fields I am interested in, is Wooden Boat. Still written with the idea of long term subscribers in mind, though a little rot did creap in, but not much.

It is certainly plausible that Woodwork will remain a good magazine (and it was uneven at best), but it's over either way. It's just a vessel to carry forward a subscription and advertiser list with a new team. It may work out wonderfully, just takes one guy who gets it, like CS, JL, or our own EW.

Re: Woodwork magazine - reading the tea leaves

#5

Re: Woodwork magazine - reading the tea leaves

Bob Demers

>Can y'all tell that I'm going slowly crazy here as I recuperate from surgery?

Nah, youre doing fine Bill, we are all going that way, albeit some faster than others :-)

I havent seen Woodworks for a while, you are refering to the 'new' one, under new management. Would that be their first 'new' issue?

Bob, still on the fence on that one

Re: Woodwork magazine - reading the tea leaves

#6

Re: Woodwork magazine - reading the tea leaves

Victor Parisian

>Glad to hear I wasn't the only one thinking that NYW episode was a waste of TIVO realestate.

Victor - Going into the shop for the better part of the day :>)

Re: Woodwork magazine - reading the tea leaves

#7

Re: Woodwork magazine - reading the tea leaves

Bob Demers

>Victor - Going into the shop for the better part of the day :>)

Wow, it must be warm, your winter is over ? :-)

Bob, running on showshoes ducking snowballs

Re: Woodwork magazine - reading the tea leaves

#8

Hmmmm...

Scott Burr in Ben Lomond, CA

>Now you have me wondering too. Guess we'll have to wait and see.

Hang in there Bill, the road to recovery can be boring at times...

Re: Woodwork magazine - reading the tea leaves

#9

Re: Woodwork magazine - reading the tea leaves

ThomD

>It was a toasty 38 in the shop today. "Sure you can use the metal planes..." But the good part is that we are in the stage of the season where the Russian front would be a walk in the park. Winter, Schminter.

I've never had a major op Bill where I was conscious before or after. Never even heard the siren. But I do remember being... a little regressed. Sounds like you have the right attitude coming out of it.

My best local friend just went in for that life changing snip. The anesthetic didn't take, and he had a real interesting time. He's walking like an Emperor penguin. That's so OT I don't even want to think about it.

Re: Woodwork magazine - reading the tea leaves

#10

Hi Bob, Had to run the AC at work today.

Victor Parisian

>My shop is well insulated and this time of year I'll run a small space heater near the work bench to take the chill off(is 54-59 chilly?) by afternoon I have to discard the sweater and turn off the heater. Haven't run the A/C in the wood shop yet this year. (The operative word there is yet.)

Enjoy

Victor

Re: Woodwork magazine - reading the tea leaves

#11

Re: Hi Bob, Had to run the AC at work today.

Bob Demers

>Humm sound like a gloat to me..Victor you suck :-)

54-59F chilly? no I go chill in my pool at these temps!

Bob, whose pool has dissapeared under a mount of white snows, for many more months to come...