Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Miller Patent Plough Plane Tutorial?

Posts

Miller Patent Plough Plane Tutorial?

#1

Miller Patent Plough Plane Tutorial?

Dean Lapinel

>I've been searching for the Jim Reed tutorial and other notes such as the use of (scotch pads?)for finishing the Paul's kit (Miller Patent Plough Plane )

Anyone know how to find these in a search?

Thanks

Re: Miller Patent Plough Plane Tutorial?

#2

IIRC Scott Burr did a decent job with his.

Victor Parisian

>He may chime in. Tutorial? Mine is still in the box it was shipped in waiting for a long weekend with no major time commitments...

Victor

Re: Miller Patent Plough Plane Tutorial?

#3

Hi Dean...

Scott Burr in Ben Lomond, CA

>I just sent you a email on some notes on finishing the rough castings.

I attacked mine with files and sandpaper for the flash on the parts. A Dremel tool and files for the runner. A red Scotch Brite pad for the rest.

I can walk you through the peining process as well if needed.

If your looking to patina it, I still have some of the stuff Paul himself recommend. I can send you some if you'd like. also I have a mess of pictures I can send you if needed.

It's a real fun project, just take your time and enjoy.

I highly recommend a set of Jim Reed's blades for it too.


img

Re: Miller Patent Plough Plane Tutorial?

#4

Decent!?!

Scott Burr in Ben Lomond, CA

>Dang Victor thanks a lot!

Man mine's so nice it's a crime!

Decent... ya, right.

8^)

Scott, just blowin' his own horn.

Re: Miller Patent Plough Plane Tutorial?

#5

Scott...that's absolutely gorgeous!! Fantastic!!

Marv....... Northern California Lake Co.

>Scott,

I think I saw one of those at Sears a couple weeks ago...*smirk*

Marv

Re: Miller Patent Plough Plane Tutorial?

#6

Re: Hi Dean... *LINK*

Wiley Horne--So. Calif.

>Dean,

Scott did a fabulous job on his. I would also recommend a set of Jim's blades, if he is still making them--they are excellent. I couldn't find JIm's tutorial, for some reason.

I bought a couple sets of needle files when doing mine. They worked very well, though a Dremel would certainly speed things along.

I've attached a link to the files I bought. Incidentally, the tool looks great right off the file, and will settle into a patina pretty quickly.

Wiley


Needle file recommendation

Re: Miller Patent Plough Plane Tutorial?

#7

Thanks!

Dean Lapinel

>Thanks Scott and thanks to those that wrote me privately. I've got all I need now including the determination to finish mine half as well as Scott's beautiful job.

I have great recipes for bronze patinas and I'm all set with peining (thanks to knifemaking).

Dean

Re: Miller Patent Plough Plane Tutorial?

#8

Re: Hi Dean...

MikeW

>Yep, they all but acquire a glow when finished and then settle down into a duller, but rich color.

Here's mine before peining.


I waited to pein mine because I bought blades from St. James Bay. I knew they were thicker than Jim's (original thickness) and also knew I would need to modify the plane a tad to make them fit.

Once everything is done, they work great and, well, look good doing it.

Take care, Mike

Re: Miller Patent Plough Plane Tutorial?

#9

Extraordinary??....

Victor Parisian

>Fabulous?

Am I getting warmer?

Victor - just coming in from washing SWMBO's car

Re: Miller Patent Plough Plane Tutorial?

#10

There yo go...

Scott Burr in Ben Lomond, CA

>More better.

Thanks, Victor!

Re: Miller Patent Plough Plane Tutorial?

#11

Re: Hi Dean...

Dean Lapinel

>Thanks and yes I have Jim's blades. Those blades are really nice.

Dean

Re: Miller Patent Plough Plane Tutorial?

#12

A Heads Up on Blades

Derek Cohen (in Perth, Australia)

>First of all, mine sits mocking me as I have yet to start it. I can't believe this state of affairs. (Actually, I have three planes to complete, others include two small infills, one from Ron Brese and the other from St James Bay). The real gloat here is that I have been too busy with woodworking to do them. Woodworking-with-a-deadline, so no break. As ordered by my wife! Oh, I do love this (and her) so! Plane building is scheduled for our Winter (about June).

Blades ... as far as I am aware Jim is no longer making blades. He posted a note to this effect on WoodNet a few weeks ago.

There is an alternative. I noticed that the blades for the Veritas Small Plow plane are a good fit. They require the machining of a central groove (with a Dremel), but otherwise are the same size and thickness as the original. And in durable A2 steel. 1/8", 3/16", 1/4", 5/16", and 3/8".

Regards from Perth

Derek

Re: Miller Patent Plough Plane Tutorial?

#13

Re: Hi Dean...

Dean Lapinel

>Thanks Mike,

You and Scott did such nice work. Nice photography as well!

I still need one of your handsaws by the way.

Dean

Re: Miller Patent Plough Plane Tutorial?

#14

Dean, it's funny...

Scott Burr in Ben Lomond, CA

>Talking to Paul these weren't made to use, but they preform quite well. Heck very well IMHO. Something I told him myself. I have a very nice tight box to hold mine in. I'll send the dimensions to you if you'd like. One must keep such treasures safe...

Re: Miller Patent Plough Plane Tutorial?

#15

Re: Dean, it's funny...

Dean Lapinel

>A big yes on the dimensions and a pic if you have one.

Re: Miller Patent Plough Plane Tutorial?

#16

Scott, I was just kidding...

Marv....... Northern California Lake Co.

>Scott,

I was just kidding, I really didn't see one at Sears.

Question....the plane is a kit? Where did you get it? I want one. Would I have to try to get financing in order to afford it?

Jeeez...Dean has one, Mike has one, You have one....is there a plough plane fraternity that I need to gain membership in?

Thanks,

Marv

Re: Miller Patent Plough Plane Tutorial?

#17

You will need the secret handshake...

Victor Parisian

>You will have to get with Scott. We elected him president at the last get together. The old musical chairs election technique.

Victor - as I was saying on the way to the shop now...

Re: Miller Patent Plough Plane Tutorial?

#18

Secret club *LINK*

Dean Lapinel

>We should have had a contest for this kit "run". That would have forced me to finish it earler and we could have all seen the variety of finishes in this fine casting.

This is how you join the secret club (too late for this cast though):


Paul Hamler secret society

Re: Miller Patent Plough Plane Tutorial?

#19

I know you were...

Scott Burr in Ben Lomond, CA

>Unfortunately there all gone now. Paul sold the rough castings as a kit a few years back. There were about 200 total if I remember correctly. They went for $400.00 ea. Not cheap by any means. Also Ellis has one as well as Derek from down under. I believe Jim Reed has 2 of them.