We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I've gotten the plane collection bug, and now have about a dozen planes in my collection. I'd like to build some kind of a display case or shelf for the planes. Anyone have some ideas that have worked for them? Of course I'd have to build in extra room for future additions to the collection. I can see where this could become addictive.
>Scott that looks exactly like mine only differant. Mine has the totes down so I can grab the planes easily when working. that and mine is made of white oak.
>1. Whatever you build won't be enough, unless you have FAR more control than the average bear and stick with a basic kit.
2. Plan for easy access of the planes you use most - and recognize that it'll take you a while to know what "use most" means. I built deep cubbies, and wound up with two tiers of planes. It's a hassle to get to the back planes. My long range plan involves drawers.
3. Depending on where you live, rust prevention or fall-to-the-earth prevention may be important. Scott in Douglasville, PA presented his elegant design, but I'd never build anything like that here north of San Francisco, because I have to assume that the earth will move in ways other than those Carole King was thinking of, and I might test whether concrete or cast iron is stronger. On the other hand, I don't much need to protect against high humidity attacking my little darlin's (most often, people in high humidity areas seem either to enclose tools in cabinets or drawers or leave them out and wax/treat them frequently).
There was a good point made before about making sure the "ones you use most" are out and about, or at least accessible.
I think right now that I'm down to 5 or 6 planes that see consistent use in the shop, and they're right behind me, on the shelf, where it won't take more than a moment's time to turn around and grab one. There's a #7 in the tool chest in the bench, and a couple of infills are down there, too. There's a bedrock or two in a chest nearby that I plan on getting in tune, and some long woodies way up on a storage shelf.
I'm sure the angled board trick works very well, especially once you turn them around so the totes are facing towards you, where you can actually grab them. But while you're stuck in the throes of plane hoarding, I suggest the bookshelf, or some other kind of ordinary shelf, where the planes will be easy to get to while you're working. Keep the ones you're using there, and eventually, you'll start to see a pattern emerge with regard to which planes you reach for the most.
Once the homhorraging of cash starts to wane, you'll be able to re-assess accordingly, and make a worthy home for those planes that have become your favorites.
Once that happens, I suggest you start to taper off the size of the collection. I know that the 80's taught us all that nothing succeeds like excess. But there's another philosophy that I'm really beginning to appreciate, called the zen of tool collecting, as explained to me by a friend of mine who collects old typewriters. I'll paraphrase as best I can...
The soul of a tool is never at rest until it finds itself in the hands of a worthy user. A real tool, after all, is made to be useful. And no one is useful while sitting on a shelf in a pile of other dusty tools. Collect what you can, and learn what you can from everything that you collect, and then send them on their way, so that they, too, can seek a more meaningful existence than collecting dust.
In that vein, look on the benefit auction board tonight or tomorrow for a Veritas #6 that I really haven't been using for the past 4 or 5 years. All proceeds after shipping go to the website.