OCD much?
James Watriss
>So, I was futzing yesterday with an old Stanley #4 that I tuned up years ago, and while I remember it performing flawlessly, I picked it up yesterday to note that the lateral adjust lever had the blade skating around at the bottom end. Workable, yes, but still, in my mind, I think it could be better.
Flash forward to today, when I found myself at the drill press with said #4, the appropriate bits, and taps, to install set screws, one on either side, to keep the business end of the blade centered in the plane, and to make the lateral adjust more predictable. I discovered one thing... I need shorter set screws, 1/4" turned out to be too long. 3/16", or 5/32" long would be better. And some thread-lock, too.
I know Lee Valley has done this with some of their BU planes, but I was surprised to see myself retrofitting this sort of thing on a plane that I used to consider a stand-up user.
No shop time for me tomorrow, I don't think. But come Monday morning, I think I'm taking the blade to the wet grinder, to get everything up to working speed, and see just how well this setup works out. If it's a hit, I think I may end up trying it on a few other planes, including an old Bedrock or two.
After that, I'm thinking two pairs of set screws for a dedicated serious smother... two for the front end, and two more higher up, to handle lateral adjust that way. Only for the dedicated finish smoother, though... lateral adjust is too valuable for anything that might one day end up truing an edge.
So, the question... have I gone off the deep end here? Or should I carry it to the next level, and do handles and paint or powdercoating* to bring old stanleys up to a crazy high level of precision, like Wiktor Kuc and his eggbeater drills?
*I know, old planes were japanned. I'm talking treatment to take old planes, and make them new. Hock blades and such, and paint or powdercoating seems like a good current-day technology that would be a good, durable coating. I'm not interested in restoration of priceless antiques, I'm talking more about bringing the antique plane to a modern day audience, and getting them to as good a condition as I can with what's available now.




