We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Well, 6,449,932,006 people on this planet who are not US citizens saw a bit of a blip in their news coverage - but for the far more importantrelevant matter at hand, I agree with Bob that an auger bit file is likely your best option. I've got one and it works very well.
>There's a great, simple article in Pop Wood from a year or two ago where C. Schwartz (I think) gives a good explanation of using an auger file to sharpen the bit. It's not that hard. Heck, even I can do it. Don't sharpen the outside of the wings of the bit. This will decrease the hole size. If you look at the bit and visualize what does the cutting, this is what you want to sharpen. The file has safe edges so that one can sharpen one edge and leave the perpendicular edge alone. The screw threads should be open but I've never worried with sharpening them. Hope this helps. BTW, it's amazing how much better a bit will do with a little touch up.
>You can contact Slav Jelesijevich. He has a shop called Mustang Furniture Designs in Chicago, but he has gobs of files, rasps, and other things to remove wood. The Google says his phone number at the shop is (312) 455-0430. He's a great guy and he'll know exactly what you need.
>Another vote for the auger bit file. I just ordered a new one from Joel at Tools for Working Wood, because I let the old one get rusty (although it still seems to work; I guess it's my backup now), and they work a treat.
Almost any sharpening manual will address how to sharpen them, but, as another poster said, it's fairly intuitive if you think about what the bit is doing.
I read, I think here, a recommendation on how to clean up and sharpen the screw threads. Most sharpening manuals envision you owning a three-cornered file small enough to get in there. The recommendation, which seemed brilliant to me, was to start the bit in a piece of soft wood, like pine, just until the threads were buried, remove the bit, dribble in some valve grinding compound (from your auto parts store) or similar abrasive, and run the threads in and out a bunch of times until they're bright and pretty. I haven't tried it yet, but it sounds like a sound approach.
>Thanks, everyone. I ordered the file from Lie-Nielsen, the cheapest that I found amazingly enough, along with two of Schwarz's videos.
I'll let y'all know how it works out.
BTW, the political thing was a spoof on the political discussion on the powered side. I do NOT want to discuss politics. if you're interested, read what I had to say in the politics thread over there.