Re: Cyclone dust collectors and plane shavings?
ThomD
>If you have a screen I would look into that. The screens have three purposes:
1) stop a dust esplosion if a bolt strikes a steel impeler blade. If your machine has plastic or Al blades this is less or maybe no concern. Over 20 years of use I generally stop the stuff I don't want from getting into my machine. But metal has struck metal and so far no big bang. But the main take-away is that new machines are supposed to have 0 spark blades. I removed the grate from my dad's.
2) Stop fingers from getting in there. My hose is permanently mounted so fingers are not going in there anyway.
3) Stop stuff from getting sucked into the turbine and requiring a time consuming disassembly. I guess they could come up with a more easily serviced one, but when free-handing, I don't really suck stuff up by accident any more. If I do, I ground the hole to the floor so it is sealed and then flip the switch. That stops anything from making it up my hose, which is fairly short.
Another option is a cloth bag below, if you have a plastic one. The problem with the plastic ones is that they don't allow the air to move down, and it all depends on gravity. Obviously cloth, even felt bags are not as wonderful as the other kinds, but if/when picking up only big chunks, it isn't the problem to have more open bags, and they will pack the material better. Mine will still move all shavings into the bag, or at least to the shelf above.
I use my dust collector only for dust, and shavings. I do not use it as a vac. I don't mean I don't pic up the floor, I just don't use it for dirt or toxics (other than wood dust). Just a hygene thing, but it also means the bag sellection doesn't have to be hepa, though may be that it currently is.
If you have a really small unit with sub 4" hose, the hose can be the problem.
I had the LV cyclone, and it probably worked fine. I found it too cumbersome for my situation where I need to move it around a 40 foot shop, or used to have to back when I has space.