Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Burnishing Rod

Posts

Burnishing Rod

#1

Burnishing Rod

Bob in Green Bay

>I am not a big card scraper person, but getting to be more so lately.

I usually use one of my big screw drivers as a burnishing tool. Works ok but looking to better performance with a purpose built tool.

I purchased some 5/16" drill stock. I intend to make a luthier's tool like Bob Smalser's article.

http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_410.shtml

I would also like to make handled shaft tool.

I know you are to lubricate the burnisher prior to using. What type of oil? I don't want it on the wood for sure. I read Jasmine oil someplace, but that is expensive. I was thinking baby oil or sewing machine oil, very light on a cloth first?

Ideas appreciated.

Bob in Green Bay

Re: Burnishing Rod

#2

Re: Burnishing Rod

Dean J in MN

>I know you are to lubricate the burnisher prior to using. What type of oil? I don't want it on the wood for sure. I read Jasmine oil someplace, but that is expensive. I was thinking baby oil or sewing machine oil, very light on a cloth first?

I use whatever oil I find on the side of my nose or behind my ear.

Really, I'm not teasing.

-Dean

Re: Burnishing Rod

#3

A half an ounce of Jasmine oil...

Stephen Shepherd in the State of Deseret

>can't cost that much, I would imagine under $15.00 and would last forever. I have used Lavender oil but have recently been using turpentine for all lubrication.

Stephen

Re: Burnishing Rod

#4

Wax

Jim in N. Va.

>I use just a bit of wax--same as I use on plane soles. Less messy and handy since I always have a bit of wax in my shop apron pocket.

Re: Burnishing Rod

#5

The best Burnishing Rod

Bill Tindall, E.TN

>Any supplier selling to machine shops will have for sale carbide rod. I get it from MSC or the local saw shop that makes cutters from these rods. The rods are highly polished and of course very hard and just the right length. Mounted in a stick it makes a superior burnisher.