We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Hi all, I am considering a set of Two Cherries square sided firmer chisels. My bench set is a set of Stanley Everlastings that I have built up over the years. The firmers are fairly long and seem to be pretty robust. Any opinions, etc?
>but I've got a handful of square sided firmer chisels, and they do come in handy from time to time. I wouldn't drive ten miles to acquire a set - not THAT useful - but they are nice when, for instance, you're trying to follow an established edge, like paring down a rabbet some more where a shoulder plane won't work. The square edge registers against the existing edge instead of chewing away at it as a bevel edge chisel will.
>I agree with Bill on the generally utility, but maybe you already have your reasons. My quible with TC chisels and many others is that I do not like the feel of a very narrow wasted chisel, particularly where anything "firm" is involved. I have used their standard chisels, and that was a feature I didn't like. If the ones you are looking at come down to a pencil width above the shoulders, then mine would be one vote against.
>I don't have the firmer chisels of TC, but prepared to work the beveled version. The latter weren't as well ground as for example the Sorbies or LNs. I did long work on the face side to flatten it and --- heard the same sighs from a friend... No other problems though, the steel is good.
Often enough the chisels are highly polished. That leads to an over rounded edge, which for sure isn't suited to furnituremaking. But you asked for firmer chisels, this won't stop you...