Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Somewhat OT general self-rant: Will I EVER learn?

Posts

Somewhat OT general self-rant: Will I EVER learn?

#1

Somewhat OT general self-rant: Will I EVER learn?

Bill Houghton, Sebastopol, CA

>I'm installing oak thresholds in the kitchen by counter-boring holes for screws and then plugging them. I did have the intelligence to finish the scrap from which the plugs are coming at the same time and to the same finishing schedule as the thresholds, but then I cut the counter-bore and clearance holes in the first threshold using, for the first time, one of those flat screw-shaped bits with the adjustable collar, and raising a flurry of splinters - actually, more like hairs - around the holes. I think the finish is encouraging the furry splinters to stay attached. I'm hoping that, when I steel wool the thresholds in a month or so, to cut back the gloss, I can knock down the fur at the same time.

Fortunately, just on one threshold, and the least "public" one, going into the laundry; for the other three, a brad point drill is giving much better results.

When, when, will I learn to test new approaches before blundering in?

Re: Somewhat OT general self-rant: Will I EVER learn?

#2

Re: Somewhat OT general self-rant: Will I EVER lea

Marv....... Northern California Lake Co.

>Hi Bill,

When, when, will I learn to test new approaches before blundering in?

We never learn anything from the things we do right, only from the things we do wrong.

So look on the bright side....if we never make mistakes, we learn nothing!

Marv

Re: Somewhat OT general self-rant: Will I EVER learn?

#3

Yea, what he said...

Scott Burr in Ben Lomond, CA

>And you never learn the first time either. There's always something to come up and bite your arse. Yet again...

Re: Somewhat OT general self-rant: Will I EVER learn?

#4

Re: Somewhat OT general self-rant: Will I EVER lea

ThomD

>Biil, make yourself happy! I like the adventure of gluing up pieces without ever test fititng them. Etc... Maybe something goes wrong now and again, but it is exciting, and it trains one to get it right the first time. All this measure twice and saw once stuff is for loosers. Do you get to measure twice and saw once when landing a plane? Though speaking from personal experience it might be nice if one could.

Re: Somewhat OT general self-rant: Will I EVER learn?

#5

Nice Rant.

Scott Burr in Ben Lomond, CA

>