Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

drill press

Posts

drill press

#1

drill press

Jerry Gibbs

>I am wintering in a small trailer and working on the deck. Don't feel sorry for my lack of workshop. Our boat is in the water 100' away. Anyway, I decided it would be a good time to use some hand tools. I have a need to drill accurate holes. I have thought about buying a small drill press, but wonder how real Luddites do it. Jerry Gibbs

Re: drill press

#2

Jim in Burlington Ont.

Very hard

Jim in Burlington On

>IMO it's very hard to beat a drill press. The three post drills I've seen aren't all that accurate. I have used the 2 squares method or two blocks of wood placed 90 degree's apart as a guide. My other favourite is to have a block of wood with the hole drilled at the drill press for a guide.

Re: drill press

#3

Re: drill press

ThomD

>Drill press or guides as mentioned, but there are some alternatives:

- egg beater drill, the straight up and down of the center of this tool is easier to hit square with than any other. It's a preferable thing to an electric, for accuracy, but not quite there to replace a drill press.

- electric drill with built in levels. Sometimes these are pretty good.

- A boatbuilding device for all the odd shapes, is like a bar clamp and one end has a spike and the other an guide. You put the spike in the far side of the object, and the drill where one wants to start the hole. It keeps everything in line, sorta like drilling on a lathe, but portable.

- John Alexander's device where a bit extention has a counterballanced level attached to it, or just taped to it. It is easy to keep level, so the workpiece has to be orientable to level for any holes. The other angle is controlled by eye or with a cheater block. Probably better for angled work than a drill press.

Re: drill press

#4

Re: drill press

Bruce, a MN Galoot

>My grandfather was a classically trained cabinetmaker in Sweden, prior to the turn of the prior century. When he came to the US, he knew things that I would now kill to know about how to do stuff. I hear reports from older relatives that he innovated in ways that they still find relevant 100 years later.

Having said that, once he arrived here and set up shop, he bought every tailed apprentice he could find. I'd still love to have the jointer, planer, shaper, drill press, unisaw, and hollow chisel mortiser that he acquired decades ago. (I got his lathe -- Grandma sold everything else on his death) He knew the luddite ways, but chose not to use them.

The moral: get yourself a drill press, even a bench model.

Bruce

Re: drill press

#5

Re: drill press

wilbur

>I love using hand tools. Drilling a hole straight is something that I am just not good at.

Ergo, I use a drill press.

I do have a brace and bit, but I use it as a substitute for a cordless drill, not as my primary means of drilling holes.

Maybe one day I'll get better.

Re: drill press

#6

Ahhh Wilbur...

Scott Burr in Ben Lomond, CA

>You NEED a Miller Falls with the built in levels.