Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Old Plane ID Help

Posts

Old Plane ID Help

#1

Old Plane ID Help

Chako

>Hello all,

Does anyone recognize this plane? Not a mark on it but a fairly distinctive cap. The cutter is marked "DR BARTON 1832 Rochester NY"

but I suspect it was a long ago adaptation.

Thanks, Chako


img

Re: Old Plane ID Help

#2

Don't know but kinda neat !

steve mackay

>

Re: Old Plane ID Help

#3

Re: Old Plane ID Help

Jim Crammond in Monroe, Mi.

>Chako,

It looks like a Standard Rule Company to me, but it is kind of hard to tell from the picture. If so, that is a very collectable plane.

Jim

Re: Old Plane ID Help

#4

Re: Old Plane ID Help

Chako

>Hello Jim,

Thanks very much for the help. All of the Standard Rule planes I can find on-line seem to have fairly well marked beds. The nearest example to this mystery plane that shows the distinctive double brass wheels, cap nut and adjuster, are made by Brattleboro Tool Co. Not many photos on-line, though. The pivoting blade holder should be a good clue, too. If you should come across any more info I would appreciate further ID help.

Thanks again and best regards, Chako

Re: Old Plane ID Help

#5

Re: Old Plane ID Help

wayne anderson

>Definitely Standard Rule Co. plane. What's the length of the sole and width of the iron? -w

Re: Old Plane ID Help

#6

Re: Old Plane ID Help

Chako

>Hello Wayne,

Thanks for your help. Blade 1 3/4. Base 2 1/16 x 8 1/8 inches which includes handle extension/overhang.

I had earlier sent an e-mail to an on-line seller of vintage plane parts trying to locate a handle. His e-mail this evening confirms this one is a Standard Rule CO. #3 and the example in his collection also came with a Barton blade so maybe this one is all original, after all.

Thanks again to everyone here for your quick, sure help.

Best regards, C.