Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Bally Block Trip Again

Posts

Bally Block Trip Again

#1

Bally Block Trip Again

Mike Jurnigan in Suffolk

>I am thinking about doing another Bally Block trip again. The details for the trip are as follows: I plan on doing the I-64 and I-95 corridor from the Hampton Roads area towards Richmond and North towards DC and Baltimore.

I plan on driving up To Bally on the 13th of February and come back on the 14th or 15th. I want to stop by York on the way back and pick up some White Pine for seat blanks for a possible chair class I have coming up in March. If there is enough interest; I will pick up your top at Bally and delivery your top within a reasonable distance from the Interstate. You would have to send me the money for the cost of the top and I would like to get $30.00 for my time and gas. Bally only accepts cash for these tops. You would need to get me the money to me in time for me to ensure that I have cash for the transactions.

You will need to contact Bally and make the arrangements for the top you want and the cost. I will provide the contact information for Bally later. You will have to unload the top from my truck yourself as I will not be able to offer much assistance in unloading since I came up on the �short end� of a jointer accident during the Christmas holidays. If you are interested, contact me at either Mike23439@yahoo.com or by phone at 757-657-6818.

Mike in Suffolk Virginia

Re: Bally Block Trip Again

#2

Re: Bally Block Trip Again

Scott in Douglassville, PA

>'Cause I need another bench...

As far as chair seats go, Bailey's (about thirty minutes north of Bally Block) has had (in the past) about 20" wide 8/4 poplar, and has thick, wide basswood, too. Something to ponder.

Scott

Re: Bally Block Trip Again

#3

Youz all zuckz!

Scott Burr in Ben Lomond, CA

>

Re: Bally Block Trip Again

#4

Re: Bally Block Trip Again

Mike Jurnigan in Suffolk, VA

>A little clarification about the tops from Bally. I have made several trips to Bally Block to purchase tops and in one case some lumber. The tops that I am referring to are "seconds". Most of the seconds are cosmetic in nature. Either a darker streak of wood down the middle or edge of the top. By dark, I mean several pieces of heart maple versus the sap. Something that would not be an issue on a work bench. The last top that I purchased, the finish was scratched. Not a deal breaker either. The tops are at a significant savings over retail or wholesale prices. One of the woodworking stores and an advertiser here at Wood Central sells Bally workbench tops. They were about 3' X 6' x 1 1/2" thick. The price was in the $300.00 range. Last time some of the guys bought an ash top that was 3' X 8' 1 1/2" to 1 3/4" for $60.00 to $80.00. Some of the tops had some holes drilled in them for some equipment that was to be attached.

I may not be from up North but there has to be some Yankee in me, because when I can by a glued up and finished top for less than what the raw lumber would cost me, I can be cheap. I do have a personal interest in this. If there is enough interest, it helps me save some gas money and you also get a top delivered to your door at a significant savings over retail. I believe one or two of the guys that bought several tops actually installed them as kitchen counter tops. If you are interested you need to talk with Russell at Bally. Their number is 610-845-7511. Russell was accurate in his description of the items that he sold. I tried to call him yesterday, but I was placed on hold for about 10 minutes while they looked for him. I had to end the call since it was eating my minutes up.

If you have other questions feel free to call or e-mail as listed in my original post.

Thanks,

Mike