Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Mounting a post drill in a building without posts

Posts

Mounting a post drill in a building without posts

#1

Mounting a post drill in a building without posts

Stephen Kirk in Quakertown PA

>Late last year I got a surprise from my father in law in the shape of a post drill. He found one, took it apart, sandblasted it clean (he has a metal shop), repainted it and sent it home with my wife when she last visited. Unfortunately it's had to lay on the floor of the shop for a while as I don't have a place to mount it. Works well, though, and it looks like the only piece I have to fix is the wooden handle. Everything else works nice.

I'm wondering if the 2x4 wall construction in my garage shop is strong enough to hold something like this? Anyone else use one of these in a shop that isn't timber framed? Any other methods of mounting it for use?

I wasn't really in the market for one, but a while ago he remembered hearing me talk about them and how interesting their mechanics are. They are truly neat pieces of machinery.

Re: Mounting a post drill in a building without posts

#2

Re: Mounting a post drill in a building without po

Fred Peake

>I have mine mounted with lag screws to the 2x4 stud wall of my garage and have no problems. Post drills are great and I use mine for all sorts of drilling, for woodworking as well as metalworking. Try to find a mounting location that will allow good acess from the sides for long material. Oh, and you'll probably need a helper as they are heavy and awkward to hold in place while mounting.

Re: Mounting a post drill in a building without posts

#3

Re: Mounting a post drill in a building without po

Stephen Kirk in Quakertown PA

>Thanks. I was thinking of putting a ledger board up to hang it on while I got it securely mounted. I figure I'll need a helper even to get it onto that though. I've got one concrete wall too, but I don't like putting holes in it if I don't have to. I may still double up on a stud just to be safe. If it worth doing, it's worth over doing - right?

I was thinking it would work well for metal as you can get a nice slow speed.

Re: Mounting a post drill in a building without posts

#4

Re: Mounting a post drill in a building without po

Bill Houghton, Sebastopol, CA

>My younger son used the one we inherited from my uncle as his metal drill when he was starting out in our barn. He found it perfectly satisfactory.

Unfortunately, the barn has a dirt floor and sits on a slight slope, so water runs through it in winter, and after he moved out, he and I forgot to move it, so it's currently rusted up solid, though moved to a drier location.

Yet another round tuit - I need to wind the Publisher's Clearing House contest for round tuits (10,000,000 round tuits for life [@250,000 per year]!).

Re: Mounting a post drill in a building without posts

#5

Re: Mounting a post drill in a building without po

Jerry Gibbs

>any chance of a picture? I don't have a clue what you are talking about. Jerry Gibbs

Re: Mounting a post drill in a building without posts

#6

Re: Mounting a post drill in a building without po

ThomD

>There is more wood in a 2x4 wall than in most timber frames, if that helps at all... If it were me, and it soon might be, I would mount it on some 3/4" ply spaning several studs. I just located one but I haven't seen it yet, though it will ultimately probably be mounted on a post at the farm.

Re: Mounting a post drill in a building without posts

#7

Here are some pics

Stephen Kirk

>The drill is on the floor, so It's hard to get a decent shot. The handle isn't attached either.


img

Re: Mounting a post drill in a building without posts

#8

The gearing 

Stephen Kirk

>


img

Re: Mounting a post drill in a building without posts

#9

The follower

Stephen Kirk

>With the lever down, the follower advances the main threaded rod and advances the chuck downward. You can flip the lever back so that you can turn the mechanism back and pull the chuck up.


img

Re: Mounting a post drill in a building without posts

#10

Hmmmm, Delta/Rockwell gray?

Scott Burr in Ben Lomond, CA

>

Re: Mounting a post drill in a building without posts

#11

Re: Mounting a post drill in a building without po

Ernie Miller

>once you get it up you are going to have a problem finding Deming drill bits smaller than 1/2" for smaller holes don't worry. you can get an old brace that has an 3 jaw chuck and a 1/2" frame cut the chuck off and mount it in your drill and then any bit will work in your drill. you will lose a little travil in the drill but have never incountered a problem.

Re: Mounting a post drill in a building without posts

#12

Maybe easier

Bill Houghton, Sebastopol, CA

>There are lots of chucks available for (bad word alert) power drills that mount on 1/2"-20 thread. You could get one of those - heck, if you're lucky at garage sales, you could probably score a worn out one with a good chuck this weekend (if your neighborhood has winter garage sales) - and mount it on a fine thread cap screw/bolt after cutting the hex cap from the end of the cap screw. This gives you a chuck with a key to tighten.

Or, you can get a hand-tighten chuck as a lathe accessory that uses the same mounting. At least you used to be able to.

Re: Mounting a post drill in a building without posts

#13

I assumed, by the way, that Ernie knew more

Bill Houghton, Sebastopol, CA

>than I do about post drills and that the holes in them are 1/2" as a standard size. If that's not true, then obviously my idea isn't useful.

Re: Mounting a post drill in a building without posts

#14

Re: I assumed, by the way, that Ernie knew more

Stephen Kirk

>I'm sure I would have discovered the lack of small bits before too long and started looking for answers. Now I know. And I have several options.

Thanks!

Re: Mounting a post drill in a building without posts

#15

Re: Mounting a post drill in a building without po

Fred Peake

>I mounted a keyed chuck with 1/2 x 20 thread as described in the previous posts. You will loose a couple of inches of adjustment in table height. The amount of travel you have will not change. I fixed the problem by remounting the drill on a longer board and replaced the round rod the table slides on with a longer piece of the apropriately sized drill rod. I can even move the table low enough to set a 5 gallon bucket on it and mix grout for the kitchen tile remodel.

Re: Mounting a post drill in a building without posts

#16

Re: Mounting a post drill in a building without po

Joshua Clark

>Stephen-

I have a similar post drill in my shop- mine is a Buffalo Forge I picked up a few years ago at a tool show. It's a really useful tool. My drill is mounted to a vertical board like yours. I bolted two lengths of 2x4 horizontally to my shop wall using 3" screws sunk into the studs. This method of mounting the drill has proved to be more than adequate and after a couple of years the drill shows no sign of coming loose from the wall.

Fix that handle, mount it, and use it. It's a fun tool.

Josh


img

Re: Mounting a post drill in a building without posts

#17

Yall'all makin me jelous...

Scott Burr in Ben Lomond, CA

>I've been hunting for one of these for years. Don't want to pay the shipping for one. Guess I might have to. Like a anvils, unless Pammie wants to lend her head as one...