Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Tried my scrub plane for its "intended" use...

Posts

Tried my scrub plane for its "intended" use...

#1

Tried my scrub plane for its "intended" use...

Denis Ch�nard, Orl�ans, Ont.

>I had a honey-do request to do some utility shelving today. Looked at my offcut pile, and there it was, a couple leftover pine boards from my shed sheathing (was cheaper than plywood).

At the time I had milled rabbets in the board so that I could shiplap them. Now that was not needed nor desirable, and it was getting late, so I used my scrub plane to mill that rabbet away, as it is said in some circles the scrub plane was intended for.

Man, that was fast! Granted, it was only a 3/8 x 3/8" lip to take off, still, five or six strokes and it was gone...

I think I'll use my scrub more often now :-)

DC

Oh, and pine (eastern white) planes like butter, not used to that...

Re: Tried my scrub plane for its "intended" use...

#2

Hulk like scrub plane

Bill Houghton, Sebastopol, CA

>I always feel REALLY powerful when I use the scrub plane, because it removes so much wood so fast. When I'm hummin' with the drawknife, it gives some of the same rush.

It may not have been a classic tool (as in Moxon), but I sure like mine.

Re: Tried my scrub plane for its "intended" use...

#3

Re: Tried my scrub plane for its "intended" use...

Stephen Kirk in Quakertown PA

>Yeah, it's amazing what a scrub plane can do. I use mine a lot for getting boards flat enough to go in the planer. I know, I use some electrons but I usually don't have the time to reduce a board in thickness by hand. However, I can easily set the board on my bench, look for any rock or bow, flip it over and take those spots off. I usually only need a few mins to get even a fairly long board (say, 36") sitting flat enough for the planer. This saves me from needing a jointer, which generally wouldn't work with wide boards anyway.

I haven't tried one on edge yet, but I really should when I hit a board with a lot of wane.

Re: Tried my scrub plane for its "intended" use...

#4

Scrubbin's fun! Especially when...

Scott Burr in Ben Lomond, CA

>Dishes are not involved.8^)