Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

help finding a mallet plan

Posts

help finding a mallet plan

#1

help finding a mallet plan

Steven

>Hello Everyone, It's been a long time since I've posted on the forum (nearly 5 years), but I think this is the place that can help me.

My old laptop went to electronic heaven and I thought I had recovered everything off the hard drive, but I can't find some plans for a very unique mallet. The mallet was first posted on something like the "antique hand tools collector" news group, or something like that. The head was made using offset turning and then shaved flat on the side. What was unique was the way the head was held on to the handle. It used something called, I think, a goose neck wedge. They also believed that it was made with apple wood.

Not much information, but I'm working from memory and hadn't looked at it for a few years. I believe that I originally found it through the Electronic Neanderthal and it may have been on the New Hampshire Woodworkers Guild page, I've been to their page and the crest is definitely the same, but the page has since changed. Anyone who has seen the mallet plan, discussion and pictures will know what I'm talking about. All help is appreciated.

Re: help finding a mallet plan

#2

Re: help finding a mallet plan

johnjesseph

>http://prweb0.voicenet.com/~rburton/mallet/index.html

Re: help finding a mallet plan

#3

Thank You!

Steven in Edmonton

>Thanks John!

I knew if I posted here someone would be able to help me.

Steven.

Re: help finding a mallet plan

#4

Re: Thank You!

johnjesseph

>I knew exactly what you were asking about immediatly- I remember that pretty well because I was just starting to get into wood working then, and just got my first dial up internet connection. I stumbled on to the oldtools listserv right away and really learned a lot...

It's a cool mallet!

Re: help finding a mallet plan

#5

Re: help finding a mallet plan

John L. Blue

>maybe a little unique is the dogwood mallet, found after

diggin' up a 4-5" dia. dogwood tree.

Re: help finding a mallet plan

#6

Dominic in Bucks County PA

Thanks for the link!

Dominic in Bucks County PA

>That is a great project! Especially for those of that that have a lathe and a hankering to make a project that will test our skills. I think I have a nice piece of Osage that'd work GREAT for this!

I copied the info into a easier-to-read MS Word document and have saved it to my hard drive.

Re: help finding a mallet plan

#7

Re: Thank You!

Greg B�tit, Crown Point, NY.

>John,

I'd say you have some impressive gifts of retention, or a far more organized "projects" file that I do! This is one is definitly a keeper! It must have been before my time :).

greg -who has a hunk of hop hornbeam waiting for this one.

Re: help finding a mallet plan

#8

Re: Thank You!

johnjesseph

>Hi Greg;

It helps to be able to remember esoteric information in my line of work.

Those GIFs were high tech back then!

Oddly, my to-do project list hasn't changed since then, just getting longer.

Re: help finding a mallet plan

#9

Stupid question...

Scott in Douglassville, PA

>I need a mallet, and have some mesquite lying around that ought to be hard enough for the head. Problem is, it's shy of 4". Can/should I glue up a large enough blank to make the 4" spec, or turn it to a smaller diameter? I might could get about 2-3/4" or 3" diameter, and am looking at chopping out dovetails with it.

Help? Told ya it was a stupid question...