Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cupboard finished

Posts

Cupboard finished

#1

Cupboard finished

Bjenk Ellefsen

>I finally completed the cupboard for my daughter's room. It took me five months of work on the Week-ends.

I used my old tools and traditional woodcraft.

I designed the molding using Roubo to trace it and and Don McDonnell's instructions to push it.

There's a lot of marks as I tend to be impatient with stock preparation. Its not bad but clearly there at close inspection. I have to become more meticulous with bench planes.

My panel raising plane does not work well so I will be looking for a replacement.

I'm happy with the result and I learned a lot and got practice out of it.


img

Re: Cupboard finished

#2

Re: Cupboard finished

Marc in Luxembourg

>Hi Bjenk,

The small cupboard is beautiful, the best ever possible place for all those treasures, dolls and teddy bears.

I watchd Don's dvd too, but didn't came to make moldings with hollows, rounds and rabbet planes yet. Meanwhile let me admire your handmade furniture.

Well done, especially appealing,

Marc

Re: Cupboard finished

#3

Re: Cupboard finished

Pam Niedermayer, Austin, TX

>That's downright gorgeous, Bjenk, great job, bet your daughter loves it.

Pam

Re: Cupboard finished

#4

Re: Cupboard finished

Bjenk Ellefsen

>Thanks! I forgot to mention that the cupboard is based on a design that Mike Dunbar used in an old article to get people to work with hand tools.

Making moldings is really a blast from design to the pushing itself. I have a book with profiles from the 18th and 19th century recorded from Museum pieces and it helped me a lot.

Roubo and Chippendale are really good to understand the whole tracing process. Roubo being adament on geometrical tracing, I did that.

I have become very comfortable with my tools and I am beginning to see my work through them. Everything is becoming clearer, simpler for me.

I love it!

Re: Cupboard finished

#5

Re: Cupboard finished

Scott in Douglassville, PA

>Beautiful. I've got a stack of old pine in the garage - I think I may have a new project. Inspiring.

Re: Cupboard finished

#6

Re: Cupboard finished

Wiley Horne--So. Calif.

>Hello Bjenk,

A beautiful result! And surely one that your daughter will cherish and have for all time.

I'm intrigued by one thing you said:

"I have a book with profiles from the 18th and 19th century recorded from Museum pieces and it helped me a lot."

Is this an obtainable book? The only book I have seen--and I should quickly say there are so many I have not seen!--but the only listing of Period mouldings I have seen is in a small paperback by Charles Hayward, entitled "The Woodworker's Pocket Book". He lists the Periods as Jacobean (1603-1660), Walnut (1660-1720), Chippendale (1745-1780), Hepplewhite (1760-1790), and Sheraton (1790-1806). Hayward shows a page of typical architectural and related furniture mouldings for each period.

Hayward has another book entitled 'English Period Furniture'--does anyone know whether this book contains typical moulding profiles for the various periods?

Bjenk, it is a wonderful piece of work, and it is much appreciated that you shared your methods as you went along. I am curious if you are still translating Roubo.

Wiley

Re: Cupboard finished

#7

Re: Cupboard finished

Bjenk Ellefsen

>Hey Wiley,

The book I have is from E.J. Warne, Furniture Mouldings. Full size sections of moulded details on English Furniture from 1574 to 1820, London: E. Benn, 1923. It was republished by Linden publishing in 1995.

Its full of Plates and it is a very good source for typical profiles on period furniture. The only thing I wished Warne had done is document the piece of furniture itself that the profile was on: the maker, where the piece was found, etc.

Re: Cupboard finished

#8

Re: Cupboard finished

Bjenk Ellefsen

>I forgot to say something about Roubo. Its been a long and very strange ride this one. I have been very busy and I had to drop it.

Jack Metcalfe a very talented Marketeur from England is doing work on the volumes with a French teacher.

I don't know yet what I will do. The plan was to translate it and make it available through Chris Schwartz's blog but I don't know hoe this could have worked out in the end with the Getty Institute being interested in having the translation. So I am sort of in a hiatus there.

I would like to come back to a more informal effort where we do just blog it as we go. Simple, easy, no fuss. But then, there was also a copyright issue because someone holds right to the recent republishing and getting copies from the 19th century is very expensive.

I am unsure as to what we can do there.

Re: Cupboard finished

#9

Re: Cupboard finished

Bjenk Ellefsen

>Scott,

Go ahead and order your hardware from Horton Brasses. They have fantastic H iron forged hinges.

Re: Cupboard finished

#10

Got my first snipe today (right hand, Andy, UK)...

Pam Niedermayer, Austin, TX

>so now I have something to use as a template for making a left hand version. It's really cool, also a side rebate. I'm almost ready to go.

Thanks so much for your push.

Pam

Re: Cupboard finished

#11

Copyrights

Pam Niedermayer, Austin, TX

>I'm not at all sure that a copyright on the reprint, even if it were enforceable, would prohibit a translation.

Pam

Re: Cupboard finished

#12

Re: Got my first snipe today (right hand, Andy, UK

Pam Niedermayer, Austin, TX

>I meant to say that the snipe plane I got today is also a side rebate, not that I got two planes.

Pam

Re: Cupboard finished

#13

Re: Copyrights

Bjenk Ellefsen

>Yeah, Pam that's what I thought but apparently Chris Schwartz found out that it is.

I am not sure out this works though. Its for the plates as we can't just scan them off the reprint. We have to find a much earlier copy.

Re: Cupboard finished

#14

Re: Cupboard finished

Bjenk Ellefsen

>I took a lot of photos while making the cupboard so if anyone would like to see anything in particular like the molding, just ask.

Re: Cupboard finished

#15

Ellis Walentine

Ditto. That's the one I have

Ellis Walentine

>

Re: Cupboard finished

#16

How about a shop shot or article?

Dan Donaldson

>It sounds like this would make a great article. Take the pictures and put some text with them and we can put it up for posterity. ;-) You don't have to worry about making the prose real pretty if you don't want to, we can fix it up for you. If interested, send it to articles@woodcentral.com or to me and I will make sure it happens. A project like this is an excellent example of things that people would like to see in progress.

Re: Cupboard finished

#17

Re: How about a shop shot or article?

Bjenk Ellefsen

>Hey Dan,

Fantastic idea. I will do that this week and send it off before the weekend.

Thanks for your interest!

Re: Cupboard finished

#18

Nice piece Bjenk!

Scott Burr in Ben Lomond, CA

>Well done Shaker styled cupboard. I take it the finish is milk paint, did you use a top coat? If so what?

Also you said:

"My panel raising plane does not work well so I will be looking for a replacement"

What type are you using now, and why don't you like it.

I recently completed my first raised panels and was not impressed with the results either using a shoulder plane and a LN 60.5R.

Unless there just a PITA to make with power tools...

Re: Cupboard finished

#19

Re: Nice piece Bjenk!

Pam Niedermayer, Austin, TX

>I've made several raised panels with power tools (specifically: router, router table, panel bits), and it is indeed a pain in the a**. you have to go over the same places multiple times, often causing the wood to burn in spots, adjust the bits, then go over it again. What's more, the panel bits are huge with lumbering cutting ability, so you must use an adjustable speed router to get slow enough speed. Maybe there are some better bits these days, I did this 4 years ago; but it convinced me that hand planes were superior.

Pam

Re: Cupboard finished

#20

Re: Got my first snipe today (right hand, Andy, UK

Pam Niedermayer, Austin, TX

>Also, Don McConnell informed me that I don't have a snipe bill at all, it's a snipe side rebate. So I guess the hunt continues.

Pam

Re: Cupboard finished

#21

Re: Nice piece Bjenk!

Bjenk Ellefsen

>Yeah, its Milk paint. I just love it and I tend to finish everything with it.

What I do is mix it and apply one coat. I sand with either 220 or steel wool 000 and apply a second coat. Once everything is dry, I wax it with bees wax.

For the panels, I dont use power tools. I dont own any. I sold everything off years ago. I have a few things for carpentry stuff for work around the house but that's it. So yeah, I do the panels with planes. My panel raiser is not working well. It's an english plane but the old thing is battered. You can also just cur rabbets all around the panel and "raise" it with a jack or rabbet plane. I prefer a good raiser, american style. I tried a well tuned one last year and it was a joy.

Re: Cupboard finished

#22

O.T. wow Pam, your actually posting under me?

Scott Burr in Ben Lomond, CA

>Turned over a new leaf for the new year?

I'm cool if you you are...

Bygones?

Re: Cupboard finished

#23

Looks like earth green. Real milk paint ?

Scott Burr in Ben Lomond, CA

>Just curious? I like it myself. If I may ask where do hale from?

I've been looking for a decent panel raiser myself for some time.

Re: Cupboard finished

#24

under, over, what diff does it make?

Pam Niedermayer, Austin, TX

>

Re: Cupboard finished

#25

Re: Looks like earth green. Real milk paint ?

Bjenk Ellefsen

>Hi Scott,

yep, it's real, authentic Milk Paint. I buy it from Homestead House Paint Company. They are fantastic people and the paint is high quality, really nice stuff.

The green is Upper Canada. They have a great varnish to go over it too and a bees wax that I love.

Try them out!