Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Shop cleanup, tour, and playing w/ panos

Posts

Shop cleanup, tour, and playing w/ panos

#1

Shop cleanup, tour, and playing w/ panos

Scott in Douglassville, PA

>Hi, all -

Dom's shop reconfig got me wanting to clean up my ManCave and try to bring some order into it. I spent some time, and, well - I guess I'm not fooling anyone. It's still a mess. But trust me - it was much worse before!

It's a handtool/Normite hybrid space, but I'm happy with how it turned out. Workflow? Wha's that? I'm just happy I can find a benchtop to rest my pop on now.

So have at it - click the pic for a bigger version. If you look close, you can see my newly-minted spokeshave gleaming... :-)

Scott


Re: Shop cleanup, tour, and playing w/ panos

#2

Dominic in Bucks County PA

Lathe in exile?

Dominic in Bucks County PA

>Scott,

Nice job! That white pegboard really does brighten up the place, doesn't it? I noticed that big old floor vice (I know that's not the correct name. I'm having a brain cramp right now) on your second bench. Me LIKEY!

But what's with the poor Delta lathe sitting all by itself under the bench? Did it misbehave and is now in "Time Out"? :>)

See ya around,

Dominic

Re: Shop cleanup, tour, and playing w/ panos

#3

Leg vise and lathe...

Scott in Douglassville, PA

>Hi, Dom -

The leg vise was a fun project. I have three vises - a front vise, a twin screw, and the leg vise. I've all but forsaken the others for the leg vise...

The lathe is only stored under there when I'm using the bench. That bench was designed to be my chair making bench, but it's a good height for all kinds of operations, so I have the lathe put away for now.

Scott


img

Re: Shop cleanup, tour, and playing w/ panos

#4

pano?

paul womack

>What pano software did you use?

(and do I see spare lenses on the bandsaw table?)

BugBear

Re: Shop cleanup, tour, and playing w/ panos

#5

CS3...

Scott in Douglassville, PA

>I use the generic, already built-in Photomerge in Photoshop. Pretty brainless, which (for me) is good. I think this was a compilation of about 10 images.

The lenses on the bandsaw are M42 screw-mount lenses I use on the 20D - a Helios and a Super Tak. They weren't quite wide enough for this shot, though, so I stuck with the Canon 28/3.5.

Scott

Re: Shop cleanup, tour, and playing w/ panos

#6

my workshop

paul womack

>A 360 degree pano, made with hugin, but I had to cut in in two to get it hosted!


BugBear

Re: Shop cleanup, tour, and playing w/ panos

#7

AHhhhhhhhhhhhhhhhhhhh!

Scott Burr in Ben Lomond, CA

>You cleaned shop! You sick monkey!

Real looks real nice!

You sick Bastr....

Re: Shop cleanup, tour, and playing w/ panos

#8

AHhhhhhhhhhhhhhhhhhhhh....

Scott Burr in Ben Lomond, CA

>More sick monkeys...................