Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Startin' to look like somethin'...

Posts

Startin' to look like somethin'...

#1

Startin' to look like somethin'...

Scott in Douglassville, PA

>Hi, all -

My wife got me a LV small spokeshave kit for Christmas a year (or two...) ago. Bought some curly red maple burl for stock recently, and have fretted over getting started ever since. Well, last night I got motivated, and after a few hours today, here's where it's at. Makes paper thin shavings as-is. Will finish shaping the other arm tomorrow, then sand it and dye stain it before shellacing and waxing it.

My wife is duly unimpressed. She just don't understand...

Scott


img

Re: Startin' to look like somethin'...

#2

Yes, yes it is...

Scott Burr in Ben Lomond, CA

>Starting to look good! That's going to be pretty when you get some finish on it. You gonna making (of finishing) some chairs?

Re: Startin' to look like somethin'...

#3

Re: pretty wood!

Dave Mount

>That burl is beautiful. Never having worked with burl, I've always wondered if using it in something like that can cause problems by having short grain across the handles, or is it so interlocked that it has sufficient strength?

Best,

Dave

Re: Startin' to look like somethin'...

#4

Purty fine and purty too

Bill Houghton, California cold in Sebastopol, CA

>

Re: Startin' to look like somethin'...

#5

Chairs, yeah...

Scott in Douglassville, PA

>...wanna get back into it again. Need some time, but it was a good excuse for this little project, anyhoo... ;-)

Re: Startin' to look like somethin'...

#6

Burly...

Scott in Douglassville, PA

>Hi, Dave -

There's a bit of flex to the handles that wasn't there before shaping, but this shave is going to be used for fine, finish work, so I think it'll be ok. I'm going to get the large shave kit here presently and use some curly claro walnut I picked up for that.

Scott

Re: Startin' to look like somethin'...

#7

Burly...Excuse me!?! ...;^) It's all good!

Scott Burr in Ben Lomond, CA

>

Re: Startin' to look like somethin'...

#8

Good for you Scott!

Scott Burr in Ben Lomond, CA

>Happy New year to your Clan!

Re: Startin' to look like somethin'...

#9

Looking mighty fine. :>)

Victor Parisian

>