Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

What angle to sharpen to

Posts

What angle to sharpen to

#1

What angle to sharpen to

Joe in a Cleveland suburb

>Hi,

It's been a while since I've used the below planes and/or sharpened them. For general use, what angles should I sharpen to and do bevel up irons normally have or use micro bevels?

Thank you.

Joe

1 - LV BU Smoother with A2 iron.

2 - Hock A2 Cryo in a #4 plane.

3 - LN 60-1/2R

Re: What angle to sharpen to

#2

Re: What angle to sharpen to *LINK*

Dave Mount

>Hi Joe--

1) For the bevel up, 25-50 degrees depending on what you want to do. Go to the link below and click on the little "Instr" links down in the listings, which will take you to an instruction manual that will explain things in detail.

2) 30 degrees is typical for a bevel down smoother.

3) Low angle blocks usually 25 degrees.

Best,

Dave


Lee Valley BU smoother page

Re: What angle to sharpen to

#3

Yep, What Dave said.

Scott Burr in Ben Lomond, CA

>

Re: What angle to sharpen to

#4

Re: What angle to sharpen to *LINK*

Dave Mount

>Hi Joe--

1) For the bevel up, 25-50 degrees depending on what you want to do. Go to the link below and click on the little "Instr" links down in the listings, which will take you to an instruction manual that will explain things in detail.

2) 30 degrees is typical for a bevel down smoother.

3) Low angle blocks usually 25 degrees.

Best,

Dave


Lee Valley BU smoother page

Re: What angle to sharpen to

#5

Whoops, double post, ignore/delete

Dave Mount

>