Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Best steel wool (or equal)?

Posts

Best steel wool (or equal)?

#1

Best steel wool (or equal)?

Wiley Horne--So. Calif.

>Hi Folks,

Post man came by today with a Greenfield plough plane. All boxwood. Very sound condition, but a few layers of grime and whatnot--this is beyond patina.

I was glad to find out that clear Briwax plus 4/0 steel wool plus elbow grease quickly removes the grime and takes this thing down to amber boxwood. However, the steel wool I have shreds like crazy--lasts no time at all. Does anybody know a steel wool which lasts, or something equal which is not heavily abrasive but will move dirt and grime while leaving finish.

Thanks, Wiley

Re: Best steel wool (or equal)?

#2

Re: Best steel wool (or equal)?

MikeW

>I alternate between the gray and white "abrasive" pads. Gray is slightly abrasive, about equal to 000 and 0000 steel wool when first cut off the sheet and "smoother" than 0000 after a little use. White is pretty much non-abrasive.

Combined with wax, both are a delight compared to steel wool.

Take care, Mike

Re: Best steel wool (or equal)?

#3

Vendor?

Wiley Horne--So. Calif.

>Thanks Mike,

I just did a quick mental inventory of all the stuff I don't know, and where to get those pads is right up there. Is this a grocery store item, or is there an online vendor?

Thanks,

Wiley

Re: Best steel wool (or equal)?

#5

Re: Vendor?

Wiley Horne--So. Calif.

>Thanks Jim!

Does it look like the cold and all is gonna break any time soon?

Wiley

Re: Best steel wool (or equal)?

#6

Re: Vendor? *LINK*

MikeW

>Hi Wiley--sorry I didn't check back. I attempted to make it to the shop.

As mentioned, Rockler is a source for the 3M product. Woodcraft use to, and my local one still does, but by and large they now carry Mirka's product. Better product for woodworking, but too thin I think for rubbing on tools.

Jamestown Distributors is another source, though I think they only carry the 20 pc packs, which is what I purchase.

Take care, Mike


Jamestown Dist.

Re: Best steel wool (or equal)?

#7

Ellis Walentine

I used to use...

Ellis Walentine

>... Elephant brand because it didn't have oil in it. I can't recall if it was Liberon that carried it. Nowadays, I'm less choosy.

Ellis

Re: Best steel wool (or equal)?

#8

Re: Vendor? *LINK*

Wendell @ Murphy, Tx

>I've bought wet/dry sandpaper and hand pads from Online Industrial Supply. The hand pads are similar to Scotch-Brite pads but cost less than half the price of the 3M products at Jamestown Distributors.

Wendell


Online Industrial Supply

Re: Best steel wool (or equal)?

#9

Thanks all

Wiley Horne--So. Calif.

>Thanks a lot for the education! I'm gonna go with W/C advertisers. Try to keep the wolf from their door. Joel has both the steel wool and the abrasive pads covered. Lee Valley has the non-shredding steel wool, too, but I can't quite relate to the abrasive power of LV's abrasive pads. So Joel it is.

Wiley

Re: Best steel wool (or equal)?

#10

Re: Best steel wool (or equal)?

R.J. Whelan

>Wiley .... I stopped using "steel wool" about 20 years ago, after a mini-disaster involving rubbing out a finish on open pored material and not removing all of the debris before applying finish. The bits of steel wool left behind rusted in the pores). I now use bronze wool which is available from Briwax (1-800-BRIWAX-X)... rj