Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Solid wood panel construction *LINK*

Posts

Solid wood panel construction *LINK*

#1

Solid wood panel construction *LINK*

Sgian Dubh

>Some visitors to the forum may find my discussion on solid wood panel construction useful or helpful in their work. Here is a link to it.

What you will find is an edited and truncated version of a larger illustrated text I have created that is intended for print publication at some point in the future.

This is of course the hand tool side of the forum and this message is cross posted with the general forum where machine woodworking tends to predominate, but nevertheless, wood is wood and it reacts much the same whether worked by hand or by machine. Slainte.


Solid wood panel construction

Re: Solid wood panel construction *LINK*

Edited #2

Thanks for sharing!

Scott Burr in Ben Lomond, CA

Re: Solid wood panel construction *LINK*

#3

Re: Solid wood panel construction

Derek Cohen (in Perth, Australia)

>Hi Richard

Thanks for posting. It is a great article. Nicely detailed, decent grammar, and even all the spelling looks familiar! :)

And there was I thinking that you misspent all your youth playing rugby and not woodworking

I trust you have had a good Chrustmas break.

Regards from Perth

Derek

Re: Solid wood panel construction *LINK*

#4

Re: Solid wood panel construction

Wiley Horne--So. Calif.

>Richard,

Thanks for posting!

One thing in particular I like about the article is the focus (toward the end) on chatoyance. I haven't seen that subject treated elsewhere. Your recommendation--to wet the surfaces with mineral spirits before committing to a final arrangement--is something I wish that I had done on more than one project..... The boards looked so perfectly arranged when freshly planed. The figure and grain match was so right. But then you glue it up, and apply the first coat of finish, and you're looking at color and reflectance mismatches.

Very useful article!

Wiley

Re: Solid wood panel construction *LINK*

#5

Re: Solid wood panel construction

Sgian Dubh

>Glad you got something useful out of it Scott, Derek and Wiley; and yes Derek, some of us do use that quaint British English. We haven't all been sucked into the globalising and blandifying (sic) maw of American ways yet, although oddly enough, American English is in many ways more olde-worlde, quaint and seventeenth century in form than contemporary British or Ocker English. Slainte.

Re: Solid wood panel construction *LINK*

#6

Re: Solid wood panel construction

Larry Williams

>So how do you deal with the difference when book matching?

Re: Solid wood panel construction *LINK*

#7

Re: Solid wood panel construction

Sgian Dubh

>Larry, that is a subject outwith the scope of the article/web page I linked you to, which itself was an extract from a more comprehensive text on timber technology issues.

I might create some text on the subject you asked about at another time in another article. It's not something that I want to write about now, nor probably in the near future. I have far too many more pressing tasks to work on. Slainte.

Re: Solid wood panel construction *LINK*

#8

Okay but

Larry Williams

>Chatoyance is one of the drawbacks of book matching in my experience. I've never found a good way to deal with opposing pore orientation in book matched glue-ups or even paired book matched panels. I don't know if there's a way to retain the apparent depth of the wood/finish and get book matched pieces to look the same.

Re: Solid wood panel construction *LINK*

#9

Re: Okay but

Sgian Dubh

>Personally Larry, I don't get too excited about the light and dark change in book matches, quartered panels and so on. What some polishers do to reduce or even seem to pretty much eliminate it is to perhaps get a base colour with a dye and partially seal the grain with a clear finish, eg, a thinned out sprayed pre-cat or a clear shellac. Then they start using things like more dye, grain filler and glazes, the latter two being things that choke up the pores and obscure the wood grain and texture.

Choking the pores helps reduce or even defeat the ability of the wood to reflect and refract light in interesting ways. Lastly, lightly tinting the clear polish coats further occludes the wood grain. From what I've seen these techniques work best on open pored or semi-open pored woods like oak, ash, chestnut, mahogany, sapele, walnuts, etc. They also take a quite a bit more time than simply gashing on a couple of coats of pre-cat after a bit of colouring up-- more time of course means a bigger charge to the client, which may or may not be a problem depending on the client's budget. Slainte.