Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

What's under your tree?

Posts

What's under your tree?

#1

What's under your tree?

Wiley Horne--So. Calif.

>Hi Folks,

Received a very nice rasp from France, but that's not what I want to talk about.

A fellow neander sent me a great package of old bitstock stuff, which I'm still going though. Really a bunch of fun. Now here's an item which I'll describe, and perhaps you can tell me what this is......it is a drill. regular tapered square shank. the business end is a long narrow spoon, more a canoe shape than a spoon. However, the very tip of the drill has a lead screw. The lead screw is in front of this long narrow spoon. What is this thing called, and does it have a particular job it is good at, that nothing else does as well?

Wiley

Re: What's under your tree?

#2

Can't help on the bit, but my tree

Bill Houghton, California cold in Sebastopol, CA

>had a great time with both sons and my bro and sis-in-law. We distributed 25-cent joke presents, with a lot of laughing and good times. Good food, too, some of which seems determined to stick around (my waist).

Pictures, of course, are required for those bits and stuff.

Re: What's under your tree?

#3

Re: What's under your tree?

MikeW

>Hi Wiley, this bit doesn't happen to have a quarter twist at the nose, does it? If so, it is a gimlet auger. However, because of the bulge in the shape, it may well be a gimlet auger bit regardless of whether there is a twist.

Note that these bits I am refering to are not "regular" gimlets.

What was under our tree? A few gifts for the kids and grandchild.

Take care, Mike

Re: What's under your tree?

#4

Nuthin' now...

Scott Burr in Ben Lomond, CA

>Except a cat playing with the ornaments.

Can you post a pic? I'd love to see it.

Re: What's under your tree?

#5

What tree?

Marv....... Northern California Lake Co.

>A survey was done, not sure when, involving one million people in the US. 37% do not indulge in the tradition.

Humbug.

Marv

Re: What's under your tree?

#6

Sorry Marv

Wiley Horne--So. Calif.

>Marv, you're absolutely right. And Christmas is not a universal observance by any means either, apart from the tree. I really just wanted to have some fun talking about my package that arrived, and thought perhaps someone else might have similar.

Wiley

Re: What's under your tree?

#7

Re: What's under your tree?

Wiley Horne--So. Calif.

>Mike,

I have two of these bits. Long narrow spoon. There is more than twist at the end. The end has a lead screw with 3 full thread turns on it. It's a pretty fine screw, to my eye.

These are not gimlets. There is a well-defined lead thread section, with a spoon right behind it. Thread is going to pull this narrow spoon into the work. Spoon is tapered, so the hole it drills is going to be tapered also. Max. diameter of the taper is 3/16" on one drill, and 5/16" on the other.

I may have to get off my hiney and go upstairs and find a copy of Salomon and see what he says on the subject.

Wiley

Re: What's under your tree?

#8

Re: What's under your tree?

MikeW

>Hi Wiley,

Salaman may have the answer. I don't have the Salaman book here at the house, else I would have looked.

The bits I was referring to appear like spoon bits, have a slight bulge in diameter about 1/4 or 1/3 up from the nose, have the "spoon" shape slightly twisted before terminating with a lead screw.

If the hole length is tapered, I suspect they might be some type of bung augers, etc.

Take care, Mike

Re: What's under your tree?

#9

Ol' Norm ! . . .

steve mackay

>I always watch Ol' Norm for his tricks then translate them to hand tools. Personaly I like the guy. Dad sent me his '96 book "Measure Twice, Cut Once". I know, I know, its for beginers and SOMEHOW (in a book on hand tools) he manages to STILL champion electron burning, but I enjoyed it. Swallowed it whole in one sitting. Worth my time and kinda brings some things back to earth after years of over thinking them. Not much of a "referance" book but an enjoyable read.

OH ! And an LV / LV " Irish Grandfather's Shirt" ! Very cool. And LOML says "smoke'n hot" ! If you don't have one get one. You'll love it !

Re: What's under your tree?

#10

Re: What's under your tree?

Tony Zaffuto

>I believe I have four of the same bits. Bought them last fall at a flea market. Saw the first and wondered if it could be craftsman-made, but when I saw three others plus all were done identically, I figured differently. Got all four for $12.

While at the Brown/Fine Tool Journal sale and auction this past fall, I asked a few drill experts, but no one could help. Mine look like a spoon bit with a small auger on the end. Maybe they are a specialty chair bit to help start a steeply angled hole a bit easier?

T.Z.

Re: What's under your tree?

#11

Gimlet bits

Wiley Horne--So. Calif.

>Tony,

I did some more looking. I told Mike wrong--Salaman says that they are gimlet bits, as Mike suggested. Salaman identifies three types of gimlet bits (plus a zillion gimlets--distinct from gimlet bits). The three types Salaman lists with lead screws are (a) twist gimlets, spiralled all the way up; (b) shell gimlets, lead screw + shell section, but no twist; (c) Swiss pattern, which have a single twist following the lead screw. I have the shell gimlet bit.

Smith's Key (1816) shows the same pattern of gimlet bits. On the plate, and the drawings in Smith's Key are fabulous, Smith just has them as 'Bits'. On the price list, they are given different names. The smallest of the gimlet bits are identified as "Wheeler's Bits" and "Bell's Bits"--these are in the 1/4" to 3/8" range. A larger bit of the same type is called a "Shipwright's Gimblet"-- and these run up to 5/8" in the Key.

Smith shows several other shell-type bits which do not have the lead screw--nose bits, dowling bits, etc.

However. Neither Salaman nor Smith show the type I have, which have a tapered shell. But clearly what I have is a type of shell gimlet bit.

Stephen Shepherd might be able to add to all this, as he has made a considerable study of the different bits, whereas I am just quoting from a couple of handy references.

Wiley

Re: What's under your tree?

#12

Re: Gimlet bits

Tony Zaffuto

>Tomorow morning I'll dig 'em out and see which I have.

Thanks for the info!

T.Z.

Re: What's under your tree?

#13

Sadly...

Christopher Fitch @ Memphis

>a sick wife and a sick one year old son.

Adam had a 100 degree fever yesterday morning. We nursed him along until a local clinic opened at 5 pm where he was diagnosed with an ear infection.

Happily he is getting better. The wife is off to the doc tomorrow. We'll see if I get sick (I'm not feeling too hot today).

Apart from that I have a kit from Legacy Planes on the way and one of the ultimate electron burners should get in on Monday: a Festool Domino.

Re: What's under your tree?

#14

Re: Gimlet bits

Stephen Shepherd in the State of Deseret

>Wiley,

Sounds like you have done some research on this, if the 'hollow' is parallel on the sides then it is a spoon gimlet or shell gimlet, if the hollow is tapered or bulging then it is a pod gimlet. The most common form of this type is the twisted pod gimlet. It has a bulge in the center of the pod is smaller before and after.

I doubt they are for bung holes as those are much larger. I also have my doubts that they are used to drill tapered holes or holes for screws as so many state. Gimlet bits are for through holes NOT for tapered holes for screws (blind holes). Screws didn't get pointed until after 1846, prior to that time they were blunt with no point.

Gimlet bits of any sort always leave an exit hole that is clean, it pulls the shavings back up the hole leaving a clean exit hole. But people keep thinking they are for blind holes.

Also the taper (in) after the bulge (towards the tang) will reduce friction while drilling deeper holes.

I read the descriptions several times, a photograph or scan would help.

Somewhere in my stuff I have one similar to your description but with parallel sides on the hollow and a fine twisted point on the end, no taper, but after the hollow the shaft does get smaller before ending in the tang.

Stephen

Re: What's under your tree?

#15

Re: Gimlet bits

Tony Zaffuto

>Wiley,

I dug through my bit box and I mistakenly posted I had four--I only haved one and it is parallel through the shell section, with a gimlet type tip. At the same time as this purchase I got several nose augers.

T.Z.

Re: What's under your tree?

#16

Ellis Walentine

Lotta good energy

Ellis Walentine

>There's not much room for more than that, since our tree this year is about 9" tall and sits on a windowsill. Since we're empty nesters these days and spent Christmas Day at our daughter's house, the expense and effort of cutting down and decorating a tree didn't make much sense.

Santa did leave me a nice gift certificate to one of my favorite tool suppliers, though. Now all I have to do is pick out just enough stuff to spend the certificate. That's pretty depressing. :-)

Anyhow, no help with your gimlet question, Wiley. Enjoy it, whatever it is. :-)

Ellis


img

Re: What's under your tree?

#17

Ahhh man that's sweet little tree!

Scott Burr in Ben Lomond, CA

>I myself have had a live tree say about 2'tall in a large pot for years.

When I got married my sister who was house sitting didn't water it... Say la ve. Never the less we got back the tree was dead. I miss that little tree. Maybe someday I'll for forgive her...

Re: What's under your tree?

#18

I can SO sympathize!

Bill Houghton, California cold in Sebastopol, CA

>I don't clearly remember the number of times late December was a contest to see if I could get better before LOML got sick (or vice versa), so there'd be one more or less functional parent to take care of the boys - but the number is a large one.

We even replayed it a few times after the nest emptied, although the problem is most acute when there are baby birds (or humans) to feed - plus those little metabolisms seem really good Petri dishes for bugs.

Hope you and yours can kick the bugs and have some fun before the New Year begins.

Re: What's under your tree?

#19

Re: Lotta good energy

Bob Demers

>Same here, ours this year, was about a foot high and sitting on the mantle piece.

We too are empty nester, and althought we do get the 'regular' tree out when the kids visits, this year we went down to my brother so we didnt bother with all the trouble.

In the olden days, when the kids were young and we had a Bearded Collie, (Scottish sheep dog) and a cat, we used to tie down the tree to the wall and did not decorated the bottom three feet of the tree.

It look kinda funny, but it prevented ormaments from flying around the room, and the tree remained up despite the cat climbing in it :-)

Bob, browsing the LV site, trying to figured out how to spend my LV gift certificates from the kids :-)

Re: What's under your tree?

#20

Bob

Wiley Horne--So. Calif.

>You don't by any chance have a picture of the cat climbing in the tree, do you? If so, we really need to see it. LMAO about the cat.

Wiley..... who knows about cats vs. draperies, cats vs. furniture, upholstery, shoe laces, getting under the house, vomiting on something pretty good, etc etc.

Re: What's under your tree?

#21

We tied our tree to the wall for other reasons

Bill Houghton, California cold in Sebastopol, CA

>We tended to buy kinda big trees when the boys were little. We have ten foot ceilings, so we can get away with 9'11" trees. These were often, interestingly, trees that the local tree farms were REALLY happy to discount, because there are so few buyers, and they need to clear them out to make room for smaller trees.

Which then led to the trees being...plump, both at the base and in the foliage. The record was the one that required both boys (14 and 10 at the time), a friend, and a block and tackle to get into the house. Somewhere, we've got a picture of that tree atop our Datsun 510 wagon, looking like the Monterey Pine Monster attacking the car, with our younger son doing a thumbs up in front of it. We may have hit 15 miles per hour on the way home, fingers crossed the whole way.

Try, just try, to find a tree stand that can hold up a tree that's five feet wide. Lots of rope to anchor points on the walls.

Of course, Pushkin the Adventurer, our gray tabby, did do a little exploring, but our trees would have fallen over even without him.

Now that the nest is empty, we've purchased (gasp!) a fake tree. I am convinced that it will use less petroleum over its lifetime than driving out to the tree farms would have, and the framework is metal so we can recycle it when it reaches the end of its useful life. No watering, no needles. The only downer is no scent.