Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

The lure of the dark side

Posts

The lure of the dark side

#1

The lure of the dark side

David Miller from Iowa

>Ok, many of you know that I am a die hard hand tool addict. My brother, on the other hand, makes Norm look like am amateur power tool collector.

Many of you also know I am searching for a new vocation and I have found it, at least for the next month - vintage power woodworking tools.

My brother kept going on about how much money these old Delta (and other brands) were worth - yada yada. I now go to about 3 auctions a week and about 10 days ago there was one with a bunch of Delta Rockwell Homecraft power tools. They were smallish and the "home" version as opposed to the contractor version, but they were going cheap so I picked up 5 for less than $100. Man, these things are hot on eBay - who knew?

So I put an ad in the paper that I was buying them and I picked up several more.

I don't think I will ever use them, but it sure is fun to drive around and harvest them - sort of like buying planes in the early 1980s - readily availbe for cheap.

Yes, I have seen the OWWM and other websites.

David

Re: The lure of the dark side

#2

Re: The lure of the dark side

Wiley Horne--So. Calif.

>David,

Great idea, and glad it's going well for you. Reckon you will find any of the old DeWalt radial arm saws, or have they all been harvested? Also, did Oliver make woodworking tools, or just big farm iron?

Wiley

Re: The lure of the dark side

#3

Re: The lure of the dark side

Todd O. Cronkhite Maine Native, Presently Away

>I have an old HomeCraft benchtop bandsaw that I bought at a flea market about 2 years ago for $20. A month or so ago I finally got around to messing with it. I completely disassembled it, cleaned it, and greased it. It's a well built little machine. I haven't used it yet because I don't have a blade for it, and the thrust bearings are shot,but it is a very nicely machine.

Those old machines, especially those that are kind of Art Decoish do have an allure to them, and don't think you'll be ousted from the Light Side for being drawn to them.

T.O.

Re: The lure of the dark side

#4

Re: The lure of the dark side *LINK*

Phil Smith

>There is a good history of the Oliver Machine Co. on the owwm.com site. Oliver actually started out selling miter trimmers, and eventually moved on to traditional power tools. The miter trimmers are really something to see. Both in range of sizes and quality. I purchased an Oliver Miter trimmer off ebay this past year. Unfortunately it was packaged very poorly and got broken in shipment. Eventually sent back to seller for refund. The mass and work on these old hand tools really is impressive. Wound up buying a Lion trimmer which is also very high quality. Looks like from the history that Oliver and Lion had a good marketing battle back in the day. Some of the old trimmer were in the 1000 lb range. Really massive hand tools.


Early Oliver history

Re: The lure of the dark side

#5

Re: The lure of the dark side

Pam Niedermayer, Austin, TX

>So massive that they weren't hand tools at all. Right? 1000 lbs?! That would take one massive hand.

Pam

Re: The lure of the dark side

#6

Re: The lure of the dark side *LINK*

Phil Smith

>I miss spoke earlier. The trimmer that wound up with is a Fox 5A miter trimmer. Net wt. 50 lbs, cutting capacity 4 3/4 in by 8 in.

There is a FOX manual on the OWWM.COM site for any who are interested. Here is the link.


Fox miter trimmer manual

Re: The lure of the dark side

#7

Well Dave

Scott Burr in Ben Lomond, CA

>Personally I'd never buy a old power hand tool. Sanders planes routers are better today. Old stationary tools are a completely other story...

Re: The lure of the dark side

#8

The other perspective

Bill Houghton, rain/sun/cold in Sebastopol, CA

>Yes, but the old aluminum-bodied tools are so pretty! And I am impressed by tools in their 50th year of age and more that are still working well.

Love my little 1954 (according to Porter-Cable, back when they supported older tools) Model 100 Porter-Cable router - handles smoothly, way more powerful than its amperage.

Re: The lure of the dark side

#9

Re: The other perspective

Wiley Horne--So. Calif.

>What is the amp rating on your Model 100, Bill? I believe that current practice for universal motors is to rate them at the current pulled at stall speed, just before smoke starts pouring out of the windings, and then translate that amperage to horsepower. I could be wrong though.

Wiley

Re: The lure of the dark side

#10

Wonderful reading!

Wiley Horne--So. Calif.

>Hi Phil,

That's a wonderful history. By the way, I'm pretty sure I was wrong in assuming (I'm having to say this a lot today) that the Oliver wood working machine company was the the same as the Oliver farm equipment company, which itself has an incredible history. It seems that Oliver tractors are at least as collectible as the Miter Trimmers. Maybe you need a tractor to go with your miter trimmer.

Want to show off some of your big arn--consider them honorary hand tools!

Wiley

Re: The lure of the dark side

#11

Re: Surely this doesn't count as a stealth gloat?

ThomD

>I was just going back to the place I got the cast iron, to check on some things that are supposed to be held for me and tranfered just as the shop closes. Picked up a floor based Bufallo drill press, and a KO Lee (the premium name not an import nock off in this case) tool and bit grinder (fully, freshly scraped in)for the price of a block plane. Also got thrown in some metal scrapers; a ribbed cast iron surface plate; some scrap shafting and aluminum; full set of real machinist's bits; Jacob chuck, 2 milling vises, bunch of carbide metal scaping blades; indexing head; and some other stuff I can't remember. Oh yea, a hand cart with winchable lift table. I would be happier if I had anywhere to put this stuff.

Re: The lure of the dark side

#12

You got to admit ...

Derek Cohen (in Perth, Australia)

>.. that they are really cute.

I have a couple of these old Stanleys - R2D2 - I rationalised that I would restore them. I rarely even use a power router ('orrible noisy, dusty things!), but I love the looks of these. Now they live on a shelf in the workshop where I can see them. I think that they are early 50's.



Regards from Perth

Derek

Re: The lure of the dark side

#14

Re: Surely this doesn't count as a stealth gloat?

Wiley Horne--So. Calif.

>No stealth is possible for that big haul of arn!! The precision machine and table is particularly great. Congratulations, and hope the shop-owner isn't doing too bad.

Wiley

Re: The lure of the dark side

#15

This whole thread is off topic, of course

Bill Houghton, overcast Sebastopol, CA again

>although I've always felt that there needs to be a category for users of old iron/aluminum - I proposed the term Cro-Magnon back on Badger Pond, and folks were using it for a while.

It's rated 5 amps, not much below the 6.5 of the later models.

The Model 100, like the Stanleys that Derek posted on his response lower down, is shaped beautifully to hold in one hand and maneuver around; kind of like a large trim router, but with more substance.

Re: The lure of the dark side

#16

Those are cool

Bill Houghton, overcast Sebastopol, CA again

>The P-C Model 100 looks very similar, with the added advantage that parts are still mostly available. I've turned down a few of the Stanleys, because collets are no longer available for them, so far as I know.

Re: The lure of the dark side

#17

Not to child safe eh?

Scott Burr in Ben Lomond, CA

>I like it all the same. I'll take two, one with a resaw blade and one with a nice smooth turning blade.

Of course we're all heretics with this post;^)

Re: The lure of the dark side

#18

Re: My favourite machines *LINK*

Wiley Horne--So. Calif.

>Derek,

Thanks for showing! Those are beautiful, and beautifully restored. I might add, Chris Vesper is equally fastidious and precise in the tools he makes, judging from the bevel gauge he sent me.

In regard to the Bandosawrus, Chris' caption requests that any info on the maker be forwarded. I did a quick search, and found one old drawing of the shops of Battle Creek Machinery Co. See link at bottom of page.

That drawing is owned by the Willard Library of Battle Creek, MI. This link,

http://www.willard.lib.mi.us/historical/bcphotos/index.htm

says that if you have questions about any of the historic photos and drawings, to contact Librarian George Livingston. The link just above lists a phone number and email address.

I have a feeling that if Chris emailed this librarian and included a photo of that restored machine along with a description of what he did to restore it, he might be able to enlist the librarian's help for additional info. on the Battle Creek Machinery Co.

Wiley


Drawing, Battle Creek Mach. Co. shops

Re: The lure of the dark side

#19

Re: My favourite machines

Derek Cohen (in Perth, Australia)

>Thanks for that Wiley. I'll contact Chris. I'm sure he'll be excited with the link.

His sliding bevel gauge is something else, isn't it? Easily the best available. Wonderful to look at and use.



Regards from Perth

Derek

Re: The lure of the dark side

#20

Re: You got to admit ...

ThomD

>I hate routers also, Derek, but that is a perty one. Also that size and format is probably the most useful, a 7/8hp PC is about the same, functionally, and has been a staple.

I also love that old belt sander (still sold though I think, or was till recently if it is gone, that has a smilar shape, but formed like a train engine). It looks like it's gone...

That bandsaw is to die for...

Re: The lure of the dark side

#21

Re: My favourite machines

ThomD

>I'm really not liking this Chris Vipers guy!! He has a Reid Gap lathe. That one just gets me. I don't know what it is about gap lathes where the bed just snakes through the gap, but it's something they tried back then that you never see today. Beautiful!!

Re: The lure of the dark side

#22

I have one of those.

Bruce, a MN Galoot

>that my dad bought new back in the '50's. Unfortunately, the shaft lock is on the end of the motor shaft, is rounded over and can't be fixed. Oh well, it would have been a nice small unit for 1/4" bits.

bruce in very wintry MN

Re: The lure of the dark side

#23

Fox and Snowflake

Phil Smith

>Below is a picture of the Fox NO. 5A Universal Trimmer resting on a Yates American Y30 Band saw.

The miter trimmer has patent dates of June 17 79; Dec. 4 88; Feb 25 90; Aug 28 90; and Jan 10 93. The handle is a replacement that works well. Every thing else is in good condition. Don't have any history to go with the trimmer.

But I do have some history for the band saw. The band saw is a Yates American Y30 Snowflake Band Scroll saw. These band saws get their name from the distinctive snowflake pattern cast into the upper wheel guard. The original engineering drawing for this machine were made in 1928. The machine was ordered by the Danville Public Schools, Danville VA. in July 1929, the saw was completed by Yates in November of 29, and shipped Dec. 3 1929. This makes this snowflake one of the earliest on record. Eventually the saw was sold to someone making tobacco baskets and then to a furniture company making furniture frames in NC. I purchased the saw from the furniture factory when it closed earlier this year. Other than paint the saw is in very good condition. It's a direct drive model, with a blade speed of about 7000 ft/min. Cuts fast and smooth.


img

Re: The lure of the dark side

#24

Re: Fox and Snowflake

Wiley Horne--So. Calif.

>Hi Phil,

Fantastic saw! Can't figure how you got into that whaletail Porsche though.

The thing that kills me about that old iron, including the Chris Vesper ones that Derek showed, is the industrial art. That snowflake design is just beautiful, as best I can imagine it with paint on it. Plus, look at the cathedral doors on the cabinet with the molded panel look! You don't do that unless management right to the top is totally involved in the products that they make (as opposed to trying to do a merger, or outsourcing to get it made cheaper).

Thanks a lot for showing!

Wiley

Re: The lure of the dark side

#25

To quote Paul Hogan, aka Crocodile Dundee,

Bill Houghton, sun/cold in Sebastopol, CA

>"THIS is a bandsaw!"