Iron & steel . . .
steve mackay
>I'm removing some features from a mutt plane to in-fill it. While grinding I noticed there were no sparks. Just for kicks I wondered why. Asked Dad, Tool & Die Maker Extraordinaire, for the short answer. I'm sure everyone on this forum already knew this but it answered a couple years of wondering for me !
" Steel makes all the sparks, iron does not make sparks. You almost have to beg
iron to make sparke when putting it to a grinding wheel. Iron is what you
could all a dead metal.
The classic example of why and when you test metal for sparking is when a
metal part has broken and you need to weld it together to repair it and you
can't really tell if it's cast iron or cast steel.
It's a 50 50 gamble because if you use steel welding rod and start to weld
cast iron it will melt the cast iron and just make a spray of molten metal.
If you use cast iron welding rod to weld cast steel it just won't stick.
So you must do the spark test on a grinding wheel and then you do know for
certain."



