Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Steam UN-bending-saving the day *LINK*

Posts

Steam UN-bending-saving the day *LINK*

#1

Steam UN-bending-saving the day *LINK*

Bill Tindall, E.TN

>This post on the main board shows how I straightened the bow out of some mahogany boards and thereby rescued them for use.


Steam UN-bending

Re: Steam UN-bending-saving the day *LINK*

#2

Re: Steam UN-bending-saving the day

James Watriss

>Pretty cool, Bill.

One thing I've started doing when I resaw:

I figure that the tension in the wood is due to the fact that the outside has dried out some, but the inside has not. So I figure the outside has most of the tension. If I can joint the wood without losing too much, I'll do that, but if not, I'll saw away 1/8-1/4" first, and then saw my planks. That first slice usually proves my suspicions, as it'll cup, and bow, and pretty severely.

On thing to consider, though... I now have a small pile of such slices, and after a few months, they're all flat again.

Maybe next time I'll try the wet iron technique BEFORE I resaw, to see if it helps remove the tension from the outside of the board.