Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Gluing brass to wood

Posts

Gluing brass to wood

#1

Jack Guzman from Maine

Gluing brass to wood

Jack Guzman from Maine

>What would be a good adhesive for attaching brass to wood? Will Liquid hide glue grab? How about gorilla glue? I suppose I could experiment but if someone has done this it would save me making a mess. Thanks---Jack

Re: Gluing brass to wood

#2

Re: Gluing brass to wood

Skip in Falls Church

>Hi Jack,

The times I've done that I used epoxy. The couple of things I've done that on are several years old and the brass is still firmly attached.

Skip

Re: Gluing brass to wood

#3

Re: Gluing brass to wood

Ray Binnicker

>Jack,

My only experience gluing brass/copper to wood is when I attach a ferrule to a handle. I use epoxy. Never had any problems

Ray Binnicker

Re: Gluing brass to wood

#4

Re: Gluing brass to wood

Wiley Horne--So. Calif.

>Hi Jack,

Maybe Bill Tindall will come along and give the right answer in a minute, but I would suggest superglue. Am sure epoxy would do it, but with superglue you don't have to mess with mixing it. Superglue has a really fast grab though, if that influences your thinking--there's not much leeway for adjusting.

Stephen Shepherd's advice on hide glue, IIRC, was to etch the metal with a garlic clove first.

Wiley

Re: Gluing brass to wood

#5

Jack Guzman from Maine

Re: Gluing brass to wood

Jack Guzman from Maine

>Adjustments not an issue.I hadn't considered superglue.It sounds like a winner.Thanks---Jack

Re: Gluing brass to wood

#6

Re: Gluing brass to wood

ThomD

>It really depends on the application, are we talking a tool ferule where taking up the space is all that is required; inlay wire; or are we talking about gluing something to a plaque where it is just a butt joint; what about plate to a hull underwater? Answers could then be something like: Epoxy, super glue, two side film, 3M 5200.

Re: Gluing brass to wood

#7

Well, shoot!

Bill Houghton, sorta sunny in Sebastopol, CA

>Here I was, getting all ready to look through my old Pop Mechanics' Shopnotes index, to find a recipe involving sulfur mixed with litharge or some such that, if you happened to ingest it, would cause your hair to fall out and your eyeballs to turn green, and people are recommending this modern stuff. Sigh.

Re: Gluing brass to wood

#8

Re: Gluing brass to wood

Stephen Shepherd in the State of Deseret

>Jack,

Use liquid hide glue (works better than hot hide glue in this case) to glue brass to wood.

The important thing as Wiley said that I said, is to etch the brass with a fresh cut clove of garlic.

Do this etching even if you should choose another glue.

Stephen

Re: Gluing brass to wood

#9

Ellis Walentine

Beat me to it, Stephen

Ellis Walentine

>That is the classic formula that I have heard often and used seldom but successfully.

Ellis

Re: Gluing brass to wood

#10

Jack Guzman from Maine

too late

Jack Guzman from Maine

>I tried the super glue and it didn't hold.It seems to have stuck to the brass but there was no apparent bond to the wood(I had to scrape the residue off the brass). So I tried epoxy and it appears to be holding. Then next time I try this I'm going to try garlic and liquid hide glue.---Jack

Re: Gluing brass to wood

#11

Re: Gluing brass to wood

Brian Anderson

>In gunsmithing we use a product called AcraGlass from Brownells to form the bedding to support the action in stocks. If the barrel and the action are not perfectly clean and the release agent applied completely the AcraGlass product will bond the metal to the wood.

The product comes in two types one is what I call the runny kind which has the consistency of maple syrup when mixed. The other is a gel product that is about the consistncy of peanut butter when mixed.

Both products can be colored.... Brown, black or left clear, Ihave had some success in tinting the gel with the white base and other colors such as dayglow orange.

But the key is the release agent. If not applied it is permanent.

Brian Anderson

Gunsmith, cabinet maker and former software engineer.

Re: Gluing brass to wood

#12

Inlays. pins, or bit and pieces?

Scott Burr in Ben Lomond, CA

>