Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Beech Plane Blanks

Posts

Beech Plane Blanks

#1

Beech Plane Blanks

Thomas Reading

>A few months (maybe a year) I seem to recall that someone was making and selling beech plane blanks. I can't seem to find the link - can anyone help?

Re: Beech Plane Blanks

#2

Re: Beech Plane Blanks

Doug Reynolds in Seattle

>Larry Williams, of Clark and Williams Planemakers, is a good place to start. I took a hollows and rounds class from him at Marc Adams School of Woodworking this year. Next year he is teaching a snipes bill class in July at Marc Adams. Maybe I'll see you there.

Re: Beech Plane Blanks

#3

Re: Beech Plane Blanks

ThomD

>I don't know if that situation has changed, but I contacted them, and his response a year or so ago, was that they had enough trouble supplying their own needs. I know where there are stands of enormous strait trees here in Ontario, but nobody seems to bother to cut them.

Re: Beech Plane Blanks

#4

Re: Beech Plane Blanks *LINK*

Pam Niedermayer, Austin, TX

>Seems to me Barbara Gill of Virginia was selling beech (and a lot of other stuff) a couple of years ago), she and her husband ran several small businesses, one of which was a wood supplier.

Pam


Barbara Gill's home page

Re: Beech Plane Blanks

#5

Re: Beech Plane Blanks

Larry Williams

>I have been trying to avoid making a post that looks commercial. We can't supply beech for bench planes, we will probably run out of that ourselves. But we now can supply moulding plane billets. There is this little problem, though. We're moving our shop and everything is almost functional again. It's going to be a bit of a race to get the tools and space going before I have to do some time on my back. The doctors seem to think they need to remove a few body parts and that is going to happen in a little less than two weeks. I don't know how long I'll be down or what Don and Bill will be able to do while I'm loafing around. If you e-mail, e-mail Don. That ought to get a rise out of him.

Re: Beech Plane Blanks

#6

Re: Beech Plane Blanks

Larry Williams

>Barbara Gill sawed that beech because I groveled a bit to get her to do it. By the time she sawed it and contacted us a supplier had promised he stocked all the beech we could need and I told her I'd help her sell what she had. Then, after running down our stock of wood, I placed an order with the supplier and found out he was blowing smoke up my rear end unless I had about $40,000 to spend on beech and could wait six to eight months. We drove to Virginia and bought everything Barbara had and were very glad to get it.

Re: Beech Plane Blanks

#7

Whishing you a speedy recovery Larry

Bob Demers

>

Re: Beech Plane Blanks

#8

Well, there you go. :) Maybe she'd have more now?

Pam Niedermayer, Austin, TX

>

Re: Beech Plane Blanks

#9

Don't let those docs keep you down long

Bill Houghton, sorta sunny in Sebastopol, CA

>Your adoring public will be out here, sending you "get well" thoughts. I hope your surgery will go smoothly, and your recovery quickly; and that you don't get too screaming bored while you're recovering.

Re: Beech Plane Blanks

#10

Re: Beech Plane Blanks

ThomD

>Best wishes for a speedy recovery, and good health in the future!

Re: Beech Plane Blanks

#11

Speaking of Plane Blanks...

Pam Niedermayer, Austin, TX

>Does C&W box their snipe bill and/or other moulding planes?

Hope all goes well with your operation.

Pam

Re: Beech Plane Blanks

#12

Boxing

Larry Williams

>We do use boxing when necessary, like on snipes bill planes or side beads. We use persimmon for boxing because boxwood, even as expensive as it is, is rarely wide enough for a good job of boxing a plane.

Re: Beech Plane Blanks

#13

Do you teach boxing in your snipe bill classes?

Pam Niedermayer, Austin, TX

>

Re: Beech Plane Blanks

#14

He might teach Kendo though. ;-)

Dave Anderson NH

>Sorry, I just couldn't resist Pam.

Re: Beech Plane Blanks

#15

yes and no

Larry Williams

>People in the workshop at Marc Adams will box their own planes and, for the most part, will make their own boxing. We'll be using equipment you probably don't have access to at home. We're confident people will find the process interesting and worth doing. There just isn't time to try to do this by hand and using other more common machines and techniques would violate the safety rules of the school. We plan to discuss traditional techniques but I don't think a lot of those techniques are known or understood. I sure don't know or understand how a lot of that work was done. There's still a lot to rediscover out there.

Re: Beech Plane Blanks

#16

I expect you to learn how to resist any day now :)

Pam Niedermayer, Austin, TX

>

Re: Beech Plane Blanks

#17

Re: yes and no

Pam Niedermayer, Austin, TX

>Very interesting. When I look at it, seems like a fairly standard tongue and groove with a rectangular block of persimmon, then shape. I knew I was making this too simple. Thanks.

Pam

Re: Beech Plane Blanks

#18

Shoot, forgot to ask: do you cover this in a dvd?

Pam Niedermayer, Austin, TX

>

Re: Beech Plane Blanks

#19

Re: Beech Plane Blanks

Ted Owen, Pittsburgh

>I hope all the medical stuff goes smoothly for you, Larry. And please give my best to Don. Really enjoyed that weekend class last summer.

Best, Ted

Re: Beech Plane Blanks

#20

not really n/t

Larry Williams

>n/t