Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Articulating eggbeater *LINK*

Posts

Articulating eggbeater *LINK*

#1

Articulating eggbeater *LINK*

Bill Houghton, foggy so far in Sebastopol, CA

>I THOUGHT I had enough* eggbeater drills...until this one jumped up and down at a yard sale yesterday, piping "take me home! take me home!"

The picture below is of the drill in its maximally-contorted configuration. I've also posted a pic, next message, of the drill in "straight ahead" mode; it's capable of several settings in between.

I thought that I was buying it mainly for its novelty value (there's a lot of aluminum or diecastings, not sure which, in it), but Google brought me an OldTools thread that includes a post by someone who's found it helpful, and it was apparently made in a military version, so I guess that the armed forces found it helpful.

The same OldTools thread mentions one that went for $185, and there's one on deBay right now with a $35 buy-it-now price; so I guess 50 cents was a worthy price to pay.

*actually, more than I'll ever realistically need in my life, but they were all cheap and hard to resist: 12, if you count the four breast drills and the ray-gun-looking kid's drill that I'm saving in case of any future grandkids.


img

The OldTools thread

Re: Articulating eggbeater *LINK*

#2

Straight ahead and strive for tone

Bill Houghton, foggy so far in Sebastopol, CA

>I need to correct myself: I did spend about $20 for my Stanley 610, but it was well worth it. Great tool.


img

Re: Articulating eggbeater *LINK*

#3

Re: Straight ahead and strive for tone

Tom MacGregor

>I've seen the Proto version. It's a streamlined all metal high-end Buck Rogersish piece. $185 is probably what the military paid for them. Glad you snagged this one. I'd be seriously worried about you if you passed up a 50 cent tool with gizmo factor.

Re: Articulating eggbeater *LINK*

#4

Interesting design, good score, I think...

Scott Burr in Ben Lomond, CA

>Too bad it looks very poorly made to me. The castings look bad or is that just me?

Any idea who made it?

Re: Articulating eggbeater *LINK*

#5

Proto made it.

Bill Houghton, foggy so far in Sebastopol, CA

>I'm familiar with Proto as a maker of mechanic's tools - wrenches and so on. I hadn't seen this kind of item with the Proto name on it. It was originally patented in 1943 by an individual who, I guess, later sold the patent to Proto - there was a lot of ferment in the hand tool business in the 1950's, when all the GIs came home from the war and started building their houses, so maybe the company thought they'd get in on the action.

It's not a high end tool, no; but for small holes in awkward spaces, it might well be OK. At minimum, it's got neat gizmocity, and provides another item for my grandchildren to fight over (if, by then, anyone even knows what an eggbeater drill is...).

Some interesting design decisions. The teeth on the crank wheel are closed at the top - that is, the wheel is cast so that there's a kind of ring around the outside at the height of the gear teeth - which captures the gear on the drill spindle, so the spindle won't fall out.

Re: Articulating eggbeater *LINK*

#6

Keeping up appearances

Bill Houghton, sorta sunny in Sebastopol, CA

>I'd never have been able to post here again if I'd let it get away.

Re: Articulating eggbeater *LINK*

#7

Re: Proto made it.

Bob Demers

>Quote it's got neat gizmocity, and provides another item for my grandchildren to fight over (if, by then, anyone even knows what an eggbeater drill is...). Unquote

LOL, they probably wont know unless you leave behind instructions :-)

My two sons are born in the 70s (mid and late 70) they havent got a clue how to 'dial' on my 1937 phone in my bedroom :-)

Strange as it may seems, touch tone phone have been around all their lives..

Bob, who has a fondness for antique..I married one..smack, err I mean..:-)

Re: Articulating eggbeater *LINK*

#8

Re: Articulating eggbeater

Marv....... Northern California Lake Co.

>Hi Bill,

I have one O tham thangs too, also made by Proto. Mine looks new. The handle has a screw-off top so you can hide things in the handle. I found it on daBay a few years ago. Think I paid about $8 for it. I see them from time to time on daBay.

Marv

Re: Articulating eggbeater *LINK*

#9

I once sent the student assistant in our office

Bill Houghton, sorta sunny in Sebastopol, CA

>to my toolbox to find the drill, and she came back saying, "there wasn't any drill there." I had to show her before she believed I could drill holes with it.

Bill, showing his age once again

Re: Articulating eggbeater *LINK*

#10

Re: Articulating eggbeater

Todd Hughes

>I probably come across about 6 or so a year, sold more then a few on the ebay and think the most I ever got for one was around $25 and that was after talking it up heavly.

..Not really a very high quality tool, nothing like a Millers Falls but they work OK...Is pretty high on the Gizmo chart though. Most of the settings were probably more of a solution looking for a problem then anything practical.Problem with them is that when you turn the body it is hard to push down on it and turn the crank at the same time. Looks good on paper but less so in the real world, though I guess for some jobs it might would do OK

Ive seen most that had red handles and I think a couple with blueish grey ones.....Todd