Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Frank Klausz's Marking Gauge

Posts

Frank Klausz's Marking Gauge

#1

Frank Klausz's Marking Gauge

Andy Lincoln,in Dearborn,MI

>Hi All,

After spending last weekend at the WoodWorks2008 show here in MI I have been back in the shop working.When Frank Klausz was set-up doing his dovetail demo out front he had a few articles on display as well,one was for a shop made marking gauge. I figured it would be easy enough to look up on the internet and get the article or back issue of the magazine,but, since it was in a way back issue(like #48 or so,iirc)it is not available on line and I was wondering if anybody here could point me to a copy of that article.

Thanks,

andy


img

Re: Frank Klausz's Marking Gauge

#2

Re: Frank Klausz's Marking Gauge

Bill Houghton, moderately nice in Sebastopol, CA

>Are you talking issue #48 of Fine Woodworking?

Re: Frank Klausz's Marking Gauge

#3

Re: Frank Klausz's Marking Gauge

Andy Lincoln,in Dearborn,MI

>Oops,I guess I left out the important part about it being American Woodworker magazine!!As near as I can tell it was around 1995 or so.

Thanks,

Andy

Re: Frank Klausz's Marking Gauge

#4

Re: Frank Klausz's Marking Gauge

Brent Smith, Montreal

>Sorry Andy, but it's not in #48. I just checked and the only article by Frank Klausz is a table.

Re: Frank Klausz's Marking Gauge

#5

Re: Frank Klausz's Marking Gauge

Andy Lincoln,in Dearborn,MI

>Brent,

I have been told the article I am searching for is in issue #42.Off to Ebay and see what is available.

Thanks,

Andy

Re: Frank Klausz's Marking Gauge

#6

Speaking of Frank Klauz

Michael Stadulis in Southern NJ

>A number of years ago I had an issue of a WW magazine that had a coin bank project designed by Frank. You put the coin in ........ and closed a drawer, and when you re-opened the drawer, the coin was gone. Can anyone scan the article for me?

Best, and Merry Christmas,

Mike

Re: Frank Klausz's Marking Gauge

#7

Re: Speaking of Frank Klauz

Tony - Memphis

>I remember that article and probably still have it. I'll check on it.

Tony

Re: Frank Klausz's Marking Gauge

#8

Found it in my DB

Tony - Memphis

>Well, my databse says the issue is AW #51 Apr 1996 and titled Magic Coin Bank. I should have it up in the attic. Email me if you want me to send it.

Tony

Re: Frank Klausz's Marking Gauge

#9

Andy...

Christopher Fitch @ Memphis

>did you ever locate the article?

Re: Frank Klausz's Marking Gauge

#10

Re: Andy...

Andy Lincoln,in Dearborn,MI

>Christopher,

It was in Amercan Woodworker #42 December 2004.I have a copy of the article on the way thanks to a gracious WoodCentral visitor.Hopefully it arrives before the hinges/hardware for my latest project so I can procrastinate on the cabinet to build another tool !!!

Andy