Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Foley Hand Saw Sharpening

Posts

Foley Hand Saw Sharpening

#1

Foley Hand Saw Sharpening

David Miller from Iowa

>I recently bought at auction a large lot of Foley Belsaw saw sharpening stuff for almost nothing. The catch was that the owner was a packrat and had so much junk around that the auctioneers, unfamiliar with the goods, tossed all the ratchets, brackets, etc. into the scrap pile which went to the scrap yard (not quite so crazy when you saw what all was laying around, but still tragic). Got the machines, but not the accessories.

Questions:

I need a couple drive wheels - little rubberized wheels that drive the flywheels

I also need the saw carriers, ratchet bars etc - everything that wasn't bolted to the machines.

I checked eBay, Thorvie, belsaw.com amd foley belsaw.com with no luck. Does anyone have some of these around or know of other sources?

Thanks, david

Re: Foley Hand Saw Sharpening

#2

Re: Foley Hand Saw Sharpening

Alan DuBoff

>Yep, ratchets are hard to come by, and get tossed out often.

Also, sellers separate them out and sell them separate as they know they go for good $$$s most of the time.

If you watch ebay, you can find them, I just bought this set recently.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220311426455

If you watch ebay for Foley stuff, you'll see ratchets come up occasionally.

The carriers can be made pretty easily, Leif Hanson has a write-up somewhere on building a carrier, but I can't find it on his site. You can still order some ratchets and possibly the carriers from Foley, but the ratchets are $70/each, not sure what they get for the carriers.

Most of the Foley gear is useless, IMO, aside from the retoother. It is worth it's weight in gold if you work with handsaws to any extent.

Good luck finding ratchets and/or carriers, while the stuff is kinda Rube Goldbergish, there's not much better to use these days. The carriers and ratchets do show up on ebay, so you should start looking for it so that when it does come up you might be the one to get it.

Re: Foley Hand Saw Sharpening

#3

Re: Foley Hand Saw Sharpening

Matt Prusik

>Dave:

I got lucky with FOLEY saw sharpening stuff in a similar way in September.

Fortunately I get a full set of saw carrier bars with the 387 automatic sharpener. And I was able to buy a set of retoothing bars on Ebay for a reasonable price a few weeks ago.

Even so, I do have an extra, single retoothing ratchet bar that I would sell you for what I paid for it. Drop me a private e-mail if you want to talk about this further.

I too need a rubberized "friction drive wheel". So if you come up with a source, please let me know.

I have a few other projects in the pipeline before I turn to saw work. But I'm optimistic it will keep my "shop busy" over the winter for a relatively minor cost.

Good luck on your finds!

Matt Prusik

Re: Foley Hand Saw Sharpening

#4

Re: Foley Hand Saw Sharpening

Alan DuBoff

>Matt,

I forgot to put that info in my reply to David, but you can get the friction wheel from Foley, I think it's about $25-$30.

I bought 2 from them a couple years ago. They have a tendency to rot apart when not used...:-)

Foley also sells the ratchets for $70/each, and have most of the common sizes, but don't sell the 16-8.5 anymore. I did buy a 15 from them, along with another at $70/each (ouch) but that got me going.

I just got that set I nab'd on ebay last week, a full set except for the 15-8, has 8-4.5, 9-5, 10-5.5, 11-6, 12-6.5, 13-7-4, 14-7.5, and 16-8.5.

The other thing you guys will need is the carrier gages if you don't have them, they allow you to position the blade on the carrier. You can make your own, but they are pretty cheap from Foley, around $6. Worth getting to get the right height, even if you do make your own gauges. I've been thinking about a stand that would hold the carrier in upside down, that would allow you to drop the blade in and set it.

Most of the saw equipment works with the carriers and ratchets.

I just stamped an 18" long 12ppi blade tonight. It's a long overdue saw that I owe to the guy I got the motor for my Nichols mill from.:-/

I only use the retoother, the other stuff is kinda useless...

Haven't seen your name in a while, hope your doing well!

Re: Foley Hand Saw Sharpening

#5

Re: Foley Hand Saw Sharpening

Alan DuBoff

>Matt,

One other thing is that the retoother can run without the motor, and you can install a handle on the flywheel, and crank it by hand. So, you really don't need the rubber traction wheel.

Also, you might have seen that some folks have just added a belt around the flywheel with a small pulley to drive it and mount the motor to the side.

The rubber traction wheel is the same that is used for the filer, as is the motor. They are interchangeable.

HTH,