Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cesar's Bark Canoe

Posts

Cesar's Bark Canoe

#1

Cesar's Bark Canoe

Kevin Adams

>A little OT, but I thought the WC folks would enjoy this 1971 film of a 67-year old Cree Indian building a birch bark canoe, from felling the tree to paddling on some beautiful flat water at the end. It's almost 58 minutes long, but well worth the time:

http://beta.nfb.ca/film/Cesar_et_son_Canot_d_ecorce/

I just thought in this time of new "space age" handtools that it would be good to get back to the basics of building a masterpiece with a few very simple (and frankly not particularly good) tools and a whole lot of skill. Please understand that this is not meant as a knock against any company or the new tools being offered these days (I find them fascinating). It's just a simple film that I hope will allow many folks to remember why they got into woodworking and that really fine work can be done with very little.

Take care,

Kevin

Re: Cesar's Bark Canoe

#2

Re: Cesar's Bark Canoe

Tim Caley

>Absolutely fascinating. I wish there was more text to go along with what he is doing. It left me with a lot of questions. To build a canoe like that only using three different kind of knives, a handsaw, and an ax is a tribute to his skill.

Thank you very much for posting that. Well worth the time to watch the whole thing.

Re: Cesar's Bark Canoe

#3

Re: Cesar's Bark Canoe

Pam Niedermayer, Austin, TX

>Now that's what I call a minimalist toolkit. :) Did hear a chainsaw in the background a couple of times.

I was amazed that I didn't need that much more narrative, although it would have been nice to know what that brown stuff was in the water (tannins?). And there I was thinking it was cool he didn't need any glue, assuming that the sycamore root would swell in water, when he made glue and applied.

Great site, too. Thanks, Kevin.

Pam

Re: Cesar's Bark Canoe

#4

Re: Cesar's Bark Canoe

Todd O. Cronkhite Maine Native Presently Away

>A little off topic? Shoot, it's probably the most ON topic post ever made here. I haven't seen it yet, but you can bet I will be watching it when time permits. Thanks a whole lot for posting it Kevin!!

T.O.

Re: Cesar's Bark Canoe

#5

Re: Cesar's Bark Canoe

Bill Houghton, sunny in Sebastopol, CA

>John McPhee wrote "The Survival of the Bark Canoe" back in 1975. You might try to track down a copy through your library. I haven't read it in years, but I seem to remember discussion of technique.

Re: Cesar's Bark Canoe

#6

Re: Cesar's Bark Canoe

Stephen Shepherd in the State of Deseret

>Kevin,

I don't think it was off topic at all. Thanks for posting this, it is well worth the hour it takes to watch.

He used at least 3 knives, one crook, a hand drill, a hand saw, ax and an awl (3 sided).

Stephen

Re: Cesar's Bark Canoe

#7

Re: Cesar's Bark Canoe

Frank Mutchler

>Thanks for the link, Kevin. Makes me wonder what 'progress' is all about.

Re: Cesar's Bark Canoe

#8

Thank you very much

Bruce, a MN Galoot

>for posting this video! It's terrific. The Satie at the end was perfect.

I just don't think I'll ever show it to my wife, though. She will have two responses:

1. why do you think you need Rob's new block plane.

2. why do you have such an inventory of tools when he could make a canoe with so few?

Bruce, an amazed MN galoot.

Re: Cesar's Bark Canoe

#9

Thanks for the post

Ron Bauman

>

Re: Cesar's Bark Canoe

#10

Enjoyed it immensely! Thanks Kevin

Marv....... Northern California Lake Co.

>

Re: Cesar's Bark Canoe

#12

Re: Cesar's Bark Canoe

Tim Caley

>I checked and my local library has a copy. Thanks for the tip. I'll give it a read and may end up buying my own copy if I like it. I would think that with the book and this video, should be able to answer my questions about some of the things he was doing.

Re: Cesar's Bark Canoe

#13

Re: Cesar's Bark Canoe

ThomD

>Boatbuilding is like that even today. I have a mountain of tools, by most recent count something like 26 stationary power tools just for starters. When I built my trimaran, the vast majority of it was built with a drill driver, and a jigsaw. No stationary tools, though I always wondered if I should have brought over (built in a rental shop) a bandsaw. Actually my tri was quite similar to a BB canoe. The plywood skin was vac bagged into a left and right side, then bent into the shape of the finished hull. Ribs and stringgers were then epoxied into it. 24 feet long and eventually 18 feet wide.

Notice that the boat is supported on Krenov style horses. Those things were massive strong.


img

Re: Cesar's Bark Canoe

#14

Re: Cesar's Bark Canoe

Pam Niedermayer, Austin, TX

>That's amazing, Thom. How did it sail?

Pam