Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Some of my Berea Pics

Posts

Some of my Berea Pics

#1

Some of my Berea Pics

Christopher Fitch @ Memphis

>I have to apologize upfront for the quality of some of these pics. I neglected to bring the good camera and this one is beginning to die.

In any case..

Some Jim Leamy planes...

http://www.jimleamyplanes.com/


img

Re: Some of my Berea Pics

#2

Some of my Berea Pics 2

Christopher Fitch @ Memphis

>More Jim Leamy.

By the way, those things are HEAVY ... not to mention beautiful.


img

Re: Some of my Berea Pics

#3

Some of my Berea Pics 3

Christopher Fitch @ Memphis

>Some Auriou carving chisels...


img

Re: Some of my Berea Pics

#4

Some of my Berea Pics 4

Christopher Fitch @ Memphis

>The fleet of vintage Stanleys were in force courtesy of Fine Tool Journal.

And yes...that is a Stanley 444, complete, in the box on the top shelf.


img

Re: Some of my Berea Pics

#5

Some of my Berea Pics 5

Christopher Fitch @ Memphis

>More vintage stuff from FTJ


img

Re: Some of my Berea Pics

#6

Some of my Berea Pics 7

Christopher Fitch @ Memphis

>Time for some Lie-Nielsen items...


img

Re: Some of my Berea Pics

#7

Some of my Berea Pics 8

Christopher Fitch @ Memphis

>More LN


img

Re: Some of my Berea Pics

#8

Some of my Berea Pics 9

Christopher Fitch @ Memphis

>Even more LN!


img

Re: Some of my Berea Pics

#9

Some of my Berea Pics 10

Christopher Fitch @ Memphis

>A far more interesting image of some LN items...

The plane in the upper middle is a chamfer plane. Missing from that display is the Tongue and Groove plane. Frank Klausz had borrowed it for his Joinery Plane session.

Barely in the picture in the bottom left corner is a new Fishtail chisel with a long handle.


img

Re: Some of my Berea Pics

#10

Some of my Berea Pics 11

Christopher Fitch @ Memphis

>More LN...including a new progressive pitch saw and a new Panel saw.


img

Re: Some of my Berea Pics

#11

Some of my Berea Pics 12

Christopher Fitch @ Memphis

>Some Sauer & Steiner planes...those black handled planes have infills made from ebony. The jointer plane (the long one in the middle) is massive!


img

Re: Some of my Berea Pics

#12

Some of my Berea Pics 13

Christopher Fitch @ Memphis

>And the last one for this batch...

Two people who need no introduction.

I'll try to put some up I have of some of the people I have some time soon.


img

Re: Some of my Berea Pics

#13

Re: Some of my Berea Pics

Wiley Horne--So. Calif.

>Christopher,

Thank you very much!! Please keep it up, as time (and camera battery!) permits. Your efforts are much appreciated by those of us who cannot be there at this grand event.

Wiley

Re: Some of my Berea Pics

#14

Ellis Walentine

Two scoundrels if I ever saw 'em

Ellis Walentine

>

Re: Some of my Berea Pics

#15

Let me echo Wiley's comments ...

Derek Cohen (in Perth, Australia)

>Christopher and others

Thank you for the pics. For those of us far away, we wish we were there ... Your pictures and reports carry us close up where we may share at tad in the fun and excitement.

Regards from Perth

Derek

Re: Some of my Berea Pics

#16

Ellis Walentine

More on the way...PIC added

Ellis Walentine

>I will have a final installment on my Berea dispatch in the next couple days, so stay tuned. I'm trying to recover, rather unsuccessfully, from yesterday's marathon (I finished posting at about 3am) and just don't have enough energy left to process photos and post a blog tonight.


Suffice it to say that this has been a transforming event for me, and today's sessions were superb, topped only at the end of the evening by a stupendous, riotous speech by Roy Underhill. He had the four hundred people in the dinner hall in stitches for half an hour with his tall tales of Woodworking in America, including animated, tongue-firmly-in-cheek tales of the glory and prescience of American woodworkers, including anecdotes of the last ice age wiping out three-quarters of the tree species in Europe because of the east-west orientation of the mountain ranges ("how dumb was that?" vs its unsuccessful attempt in America because of our mountains' north-south orientation, attributed to how smart America was, though it wouldn't come into existence for another 10,000 years), a fractured history of the United States including woodworking references from Thomas Jefferson regarding his cabinetmakers (including the slave brother of his mistress Sally Hemmings), and the tallest tale of all about how an oddball lovespoon-like artifact supposedly handed down from his grandfather and carved with an axe, had resulted from an incident involving a "hoop snake" (as opposed to a fanged viper), a creature that had no fangs and stung with its tail, supposedly lurked in trees coiled in a hoop, and rolled down hills in pursuit of its prey, injecting a venom that caused the unfortunate soul to swell up to school-bus proportions, at which point the snake would gum it to death, but which, because of Roy's grandfather's quick thinking had stung a pine tree by mistake, causing the tree to swell instead, whereupon gramps had attacked the bloated tree with his axe and carved the magnified links of the lovespoon/chain before they shrank to the tiny proportions of the final carving. (That was the longest sentence I've written in a year, maybe ever. :-))

I wish I knew where Roy gets his inspiration. It was an act that couldn't be followed -- I've never even seen anything like it; no wonder they call him St. Roy -- and the evening ended on a fabulous up note. Kudos to Roy and all who contributed to the excitement, interest and value of this conference. I hate to see it end.

Cheers from Berea,

Ellis

Re: Some of my Berea Pics

#17

Re: More on the way...

ThomD

>How may woodworkers write books on rhetoric?

Re: Some of my Berea Pics

#18

Re: Let me echo Wiley's comments ...

Pedder

>Wiley and Derek wrote what i feel, thank you very much for the picures. Any chance to show a little more from the Veritas benches? There were some rumoprs about new planes...

Cheers Pedder

Re: Some of my Berea Pics

#19

Ellis Walentine

Under wraps

Ellis Walentine

>Rumors abound, but we will have to wait until November 24 to see if they're true.

Ellis

Re: Some of my Berea Pics

#20

Joe McMahon

Re: Under wraps

Joe McMahon

>I saw and held both new planes and they were awesome! I got a chance to examine, hold and play with two new planes coming from Lee Valley on Nov 24th. Rob Lee said that he commissioned the designers to make the planes without regard to cost as he was looking for quality , fit, finish and function. The designers didn't let him down with two versions of the same plane, a standard model as well as a top of the line model which is made from a new metal that is not stainless steel yet will resist rust and tarnish as well as ss. After they were designed, Rob then told the designers to produce both planes but save some $ on the cost. Again they replied with two excellent planes that are priced right.

Both were as fine a melding of metal parts as you will find anywhere. They fit the hand like a glove and had the heft and strong feel of a solid piece of metal. While I didn't have the time to try them on wood, I am certain that they will perform as well as they look.

If you have not had a chance to meet Rob Lee, you are really missing out! He is a real gentleman who speaks to you, and not at you. For a person who is the head of such a large company, Rob acts and talks just like your next door neighbor. (or at least how you would like your next door neighbor to act). His personality matches his company and their customer service, top notch!!

All in all, Woodworking In America and test driving the toys from Lee Valley was all you could hope for and more, a LOT more!

Finally, at one of the seminars, the question of beta testing came up to Rob Lee. He responded and mentioned how impressed he is with Derek Cohen's insight, suggestions and reports. Obviously, Rob Lee holds Derek in high regard and rightfully so.