Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

French-Footed Federal Wall Cabinet

Posts

French-Footed Federal Wall Cabinet

#1

French-Footed Federal Wall Cabinet

Bill Tindall, E.TN

>I first saw a reproduction of this cabinet at the summer SAFFM meeting in 2007. It was made in the shop of Mack Headly Sr. and Sons, Berryville, VA. Later that year the shop offered a class in making this piece and I quickly signed up for the class. The classes are described at the web site for classes taught at this shop WWOTSV.com. (the site only works with Explorer and doesn't with Mozilla in case you want to look at it). In August, 3 other students and myself began the week long class under the skillful tutelage of Jeff Headley and Steve Hamilton, cabinet makers in this 3rd generation shop. This was a particularly good piece for a class as it taught the operations necessary to build most any case piece plus it included veneering. The class was a delight and I learned so many things about practical case construction that I could never have learned on my own. The advantages of taking a class in a working shop are considerable. Available to explore were jigs and patterns and pieces of furniture the shop had made.

Too soon the class was over and I was left to complete the doors and finish the piece at home. I had never finished mahogany before and I was concerned about the crotch veneer working out ok. It is easy to get it too dark. After much fretting the sanding, wash coat, stains, glaze, sealer, filler and top coats were applied and rubbed out. Two hundred years from now the Antiques Road show will wonder how a Krenov catch got in a Federal cabinet. The piece will join the eclectic collection of furniture in the living room and house the CD collection.


img

Re: French-Footed Federal Wall Cabinet

#2

Re: French-Footed Federal Wall Cabinet

Wiley Horne--So. Calif.

>Congratulations Bill!

All your hard work and research has paid off many times over. The crotch mahogany panels are astounding, as is the seamless veneer application you've made. I am equally impressed with the amazingly seamless lower section of the front, including the apron and foot coverings--looks like all one piece, yet I know there is plenty going on down there to create the French feet, plus join them to the apron.

Overall, the piece is just full of grace and harmony. The fact that the crotch figure runs continuously up through the drawer is part of that unity. As is the beautiful foot section, which plants it on the ground so well.

Magnificent job!

Wiley

Re: French-Footed Federal Wall Cabinet

#3

Re: French-Footed Federal Wall Cabinet

Andrew Lunn

>Hey Bill, that's some really fine work. Could you say a little bit more about the piece? I'd be curious to know what the substrate is under the veneer, and what the insides of the doors look like, as well as what finish you used, and what contribution hand tools made to the whole project. Beautiful work. It sure doesn't look like it was made by "a student." ;) Thanks for sharing.

Re: French-Footed Federal Wall Cabinet

#4

Nice job Bill!!

Adam Cherubini

>That's really nice work. I like the color. I always fret over where rossette pulls go. How did you decide where to put yours? Many pieces I've seen put the rossettes in the middle of the drawer (heightwise), which puts the bail close to the bottom (but never below). Side to side is even harder. I often try golden section as a first crack at the spacing, but that doesn't always work.

Beautiful work. Great to see the final product.

Adam

Re: French-Footed Federal Wall Cabinet

#5

Ditto, great work, Bill; but I want to see more.

Pam Niedermayer, Austin, TX

>

Re: French-Footed Federal Wall Cabinet

#6

hardware spacing

Bill Tindall, E.TN

>The drawer is 10 cm high. The center of the rossette is 5.8 cm from the drawer bottom. I thought the pull looked better set higher than center and this notion was confirmed by examination of other similar hardware on period pieces.

The drawer pulls are centered on the door, which centers the pulls on the crotch pattern. The elevation of the door hardware was determined by what I thought looked good with the cabinet on the ground and the observer standing.

Re: French-Footed Federal Wall Cabinet

#7

Wow, absolutely fantastic!

Paul Kierstead

>

Re: French-Footed Federal Wall Cabinet

#8

Re: French-Footed Federal Wall Cabinet

Ace Karner

>That is absolutely one beautiful piece of furniture. I can only hope to make something that nice before I depart for that woodshop in the sky.

Re: French-Footed Federal Wall Cabinet

#9

Ummm... Yea... Ummm...

Scott Burr in Ben Lomond, CA

>I've been following all your posts regarding this endeavor you took upon yourself. I must say Bill, SWEET! I feel you did a great job knowing what you went through making this fine piece. Seems to me you went through a lot of firsts on this. I see a great learning experience and the final product is your reward. Oh yea, you should sign it and be proud!

Re: French-Footed Federal Wall Cabinet

#10

bravo!

Tom Sontag - St. Louis

>Beautiful piece. Excellent design, proportions, finish, execution, even a decent photo. I'd like to see the inside (with CDs would be great).

Well done!