Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Saw Till

Posts

Saw Till

#1

Saw Till

Derek Cohen (in Perth, Australia)

>As promised, here are the pics of the saw till I completed. This was built last weekend, and I managed to fit it today.



This is the cabinet where I faced the dovetails in the wrong direction! They were nice dovetails as well .. sadly, they will not be seen (unless you peer underneath or climb on top!).



There is a small collection of rip and panel saws, a half back, a few Japanese saws, and a bunch of back saws.



The workshop rebuild is slowly taking shape. Here are two of the new cabinets.



Regards from Perth

Derek

Re: Saw Till

#2

Clever ideas there, Derek

Bill Houghton, rainy in Sebastopol, CA

>I like your placement of the Japanese saws in the space left behind the small back saws. Good use of space.

On the larger shop picture: are you sure you have enough spokeshaves?

Re: Saw Till

#3

Re: Clever ideas there, Derek

ThomD

>Look pretty awkward to get at. but as long as you can get at the saws you use regularly, It's a win. Really nice piece of work, and the dovetails are pretty, maybe a mirror on the ceilling!

Re: Saw Till

#4

how is it hanging -- a cleat?

VTAndy4

>

Re: Saw Till

#5

Re: Saw Till

Kevin French, Antrim, NH------WebKitFormBoundary3x

>I like it!

It's full, but it looks like a basic load of saws.

Re: Saw Till

#6

Re: Saw Till

Marc in rainy Luxembourg

>Hi Derek,

Enjoyed your saw till, but love your spokeshave cabinet.

Marc

Re: Saw Till

#7

Nice looking Till Derek

Scott Burr in Ben Lomond, CA

>Clean and simple. I like the coordnation with the other tool holding units too.

Now, What's up with all the back saws?

Re: Saw Till

#8

What do you mean, Scott?

Bill Houghton, rainy in Sebastopol, CA

>I count only six back saws - eight, if you count the long ones that look more like miter box saws. Shoot, I think Derek's just a beginner in this saw accumulation business.

I started counting saws hanging from the ceiling joists one day and stopped counting at 50, though it now occurs to me that, with another 10, I could have one for each year of my age, which would be a great excuse to keep bringing home orphaned saws ("But I need this one to equal my current age"), except that I find more than one per year. Since they're mainly about $1, it's hard to turn 'em down - kind of like my body's attitude toward corn chips, but with fewer negative health consequences.

Re: Saw Till

#9

Re: Saw Till, Dovetails wrong way?

Stuart Hough

>I'm still new at this. I would think the dovetails should be on the vertical sides, due to the weight of the saws (and gravity) pushing on the bottom. Please enlighten me!!

Re: Saw Till

#10

Re: Saw Till, Dovetails wrong way?

Derek Cohen (in Perth, Australia)

>Hi Stuart

You are correct. But that was what I was referring to earlier on. I did post about this mistake earlier (in the thread about Cosman cutting dovetails). As I said then, I decided not to redo the cabinet as I felt the glue would hold, particularly if I supplemented the sides with dowels, and the mistake would remain as a reminder to pay attention next time!

Regards from Perth

Derek

Re: Saw Till

#11

Re: What do you mean, Scott?

Derek Cohen (in Perth, Australia)

>Hi Scott and Bill

I've been discarding saws of late. Just keeping those that I use, and keeping them close to hand. Two rip and two crosscut, plus a halfback for use at the bench. Among the backsaws are two tenon saws (14" and 12") and two dovetail saws (LN and IT), and there is room for two more, one of which is a carcass saw that will eventually be completed by Mike Wenzloff. I actually have a few others, but they are stored elsewhere.

Regards from Perth

Derek

Re: Saw Till

#12

Ahhh Bill...

Scott Burr in Ben Lomond, CA

>I was talking about "usable" saws not ones just lying about. like most of us. I'm very curious how he's has them sharpened and how their used.

Rains over and the Lasagna in the oven! It's going to be good night...

Re: Saw Till

#13

See Bill...Thanks Derek!

Scott Burr in Ben Lomond, CA

>I nowed there was a method to his madness;^)

Thanks Derek!

Re: Saw Till

#15

Sort of like celebrating your setback!?!

Stuart Hough

>

Re: Saw Till

#16

Isn't this the way...

John in NM

>for a cabinet box that sits on the floor? Like a slant top desk or something? In that case the idea is to keep the sides from being pushed outwards.

Either way, I'd be very surprised to ever see that box fail!

Re: Saw Till

#17

So Derek can cram in more saws...

Bill Houghton, rainy in Sebastopol, CA

>without blowing out the sides. Clever.