Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Gimlets

Posts

Gimlets

#1

Jack Guzman from Maine

Gimlets

Jack Guzman from Maine

>I remember my father having some gimlets that I fiddled with a little when I was real young.Since I got seriously into woodworking I've thought about these little gadjets and wondered if they could be useful to me.I always dismissed them as being unneccesary in a shop like mine with a full array of eggbeaters preloaded with all the useful sized bits,plus a drawer full of minibits and pin vises.I also have various styles of awls. Why would I possibly need a gimlet?

Then I bought Chris Schwartz's video"Forgotten Hand Tools".He talks about these little gadjets. So I got some and mounted them within easy reach right over my bench. I started using them on a clock case I was building and found out that I was missing something big here.I deal with tiny brass screws in hard woods.I didn't know it but I needed gimlets.They now are used regularly. They're great for real small hinges. I haven't used any of the bigger ones yet but I'm sure I will soon enough.---Jack

Re: Gimlets

#2

Re: Gimlets

Skip in Falls Church

>Hi Jack,

I bought a set of gimlets a long time ago and mine went sort of unused for a good while. I was making a small box and needed to screw the hinges on and I just couldn't get the pilot holes straight and centered in the holes no matter what I did.

I think it was mostly in frustration that I pulled out a gimlet and found it made the job a breeze. I find the visual feedback helps me get it straight and they're strong enough to guide a bit if it starts going astray. I find I now use them quite a bit and wouldn't let them go easily.

Skip

Re: Gimlets

#3

Re: Gimlets

Ron In Sterling CT

>Jack:

I agree with your comments. I have accumulated quite an assortment of them over the years of attending auctions and flea markets. Each time I would get one or two, I would put them in a box with the others. This summer I was doing some rehabbing/rust removal, so I cleaned up a couple. While making some small boxes a month or so ago, I had the same revelation as you. Wow!!!! what a tool. This old dog just learned a couple new tricks.

Ron

Re: Gimlets

#4

Re: Gimlets

David W. Dougherty

>I use my gimlets every time I start a new violin neck; I use them to "drill" the pegholes. They are the perfect tool for the job (when one doesn't have a drill press that is). I start the gimlet and then I can easily check all three dimensions by just rotating the piece and sighting along the gimlet and comparing its orientation to the 6-squared block. I keep sighting as I deepen the hole. I would be lost without mine.

Re: Gimlets

#5

Jesper, Denmark

Re: OK, I'll bite, what are Gimlets?

Jesper, Denmark

>

Re: Gimlets

#6

Jack Guzman from Maine

Gimlets *LINK*

Jack Guzman from Maine

>Jesper,

Gimlets are tools for hand drilling screw holes.The end is threaded.

Jack


Gimlets at Lee Valley

Re: Gimlets

#7

Variations on Gimlets

Bob Demers

>There are basically two types, if one was to look at the cutting edges only.

One, my prefered types, has a more expanded conical cutting edge, drilling a taper hole, which I find better for your typical woodscrews.

These are very reminescent of the old gimlet auger bits

See pic.

That one incidently, came from my very first tool set, from Simpson-Sears, circa early 60 when I was a kid (Yes DC, I was once young :-)

Bob, still young at heart


img

Re: Gimlets

#8

Variations on Gimlets part 2 Gimlets

Bob Demers

>The other type, is like the one sold currently by LV.

It does not produce a conical hole, and does not, in my experience cut as fast.

It does not however, tend to tear as much in some wood species, like the other type which are more agressive.

That one pictured, is one of my antique

Proving that both types have existed for a long time

Bottom line, gimlets are fast, useful, and still very much relevant

and oh yes, they never need recharging :-)

Bob


img

Re: Gimlets

#9

The other type of Gimlets for sale *LINK*

Bob Demers

>At Woodcraft

These are very similar to my own DIMAR set, except that mine are not nickel plated, and have their handle part painted blue (which is chipping of course)

I look up my dimar set (of 5) on their website, but they do not seem to carry them anymore.

I bought my set at the Halifax woodshow, years ago, but I also saw them at the Ottawa woodshow more recently

I look up a bunch of WW stores on line, Woodcraft and LV seems to be the only ones still carrying them, and each sell the other types

Bob, off to work on his kitchen island project


img

Other type of gimlets at Woodcraft

Re: Gimlets

#10

Re: Gimlets *LINK*

Joel

>Another type of gimlet which is no longer for sale was totally forged and IMHO worked the best of any design. However the link below is to a different type of gimlet which is still easily available, can even be made at home, and works like a charm.


Yet another variation of gimlet design

Re: Gimlets

#11

Could be spelled "Ginlets"

Marv....... Northern California Lake Co.

>

Re: Gimlets

#12

What about 'gimblets'?

Stephen Shepherd in the State of Deseret

>

Re: Gimlets

#13

Gimlets are great tools...

Scott Burr in Ben Lomond, CA

>I love them anytime I need a tapered hole. Now I just need a set that will go in a brace.

Re: Gimlets

#14

Ahh You beat it.

Scott Burr in Ben Lomond, CA

>Love those lil onions...

Re: Gimlets

#15

Doh! Should read: Ahh You beat me to it...

Scott Burr in Ben Lomond, CA

>

Re: Gimlets

#16

Except that type of gimlet, used vigorously,

Bill Houghton, Sebastopol, CA

>discourages precision, rather than encouraging it.

Re: Gimlets

#17

Gimblet and Gimlet are both correct

Marv....... Northern California Lake Co.

>Gimblet...

A small auger turned with one hand that makes a round hole in wood.

A Gimlet has a screw at the tip, also turned by hand.

Marv

Re: Gimlets

#18

Re: OK, I'll bite, what are Gimlets?

Bill White

>Usually made with vodka and Rose's lime. On the rocks.....Oh shoot!! Wrong website. (Sorry, I just could not resist.)

Bill

Re: Gimlets

#19

Jesper, Denmark

Re: Gotcha.......

Jesper, Denmark

>Thanks. I had some of those, just did not know their name.

There was another similar "screw starter drill" in common use in my youth. In Danish, platbor, translated to flat drill. It was simply a consstruction similar to an awl, but with a flat sharpened end with two facets. It was use to cut tacross the grain by pushing and wriggling a bit to make a started hole for screws.

Re: Gimlets

#20

I believe, from your description,

Bill Houghton, rainy in Sebastopol, CA

>that the screw starter drill is similar to what is known in English and American practice as a bradawl.