Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Schoolhouse Clock

Posts

Schoolhouse Clock

#1

Jack Guzman from Maine

Schoolhouse Clock

Jack Guzman from Maine

>This is a clock I just brought back from the junk heap.I got it cheap. I found it at a flea market minus the lower door and upper bezel and glass.The clock was dirty.I cleaned it,built a lower door(the stain doesn't match the patina of the case exactly but I think it's close enough)and bought a new bezel.After cleaning the case to get most of the grime out I waxed all the wood.The new bezel was shiny new brass so I lightly sanded it to get any protective finish off it and fumed it with vinegar.The vinegar did a nice job of ageing the brass.I removed the movement and cleaned/reoiled it.After a little tune-up it runs great.

In a previous post I asked about coating the dial to keep the paint from flaking off.I decided to leave it alone. I figure the new glass door should slow down the deterioration of the paint somewhat.Thanks for looking.---Jack


img

Re: Schoolhouse Clock

#2

Purty nice, nicely purty

Bill Houghton, Sebastopol, CA

>The old paint-falling-off dial, coupled with the other original and reproduction patina on the clock, makes it look like a survivor - which I like.

Re: Schoolhouse Clock

#3

awesome. :)

James Watriss

>

Re: Schoolhouse Clock

#4

Well done Jack!

Scott Burr in Ben Lomond, CA

>You did good. Enjoy the fruits! Let the dial face alone like they say...

Adds to the look