Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Baby Safe Finish

Posts

Baby Safe Finish

#1

Baby Safe Finish

Frank Mutchler

>Hi all,

It's been quite a while since I last posted. Various jobs have drained all my free time until recently. I see that most of the familiar names are still here as well as many new ones.

I'm hoping to get suggestions for a safe finish to use on a maple crib I'm making for a soon to arrive granddaughter. Will the standard poly finishes from the big box stores work?

Re: Baby Safe Finish

#2

Re: Baby Safe Finish

roninkokomo

>Should be fine. Most of the finishes that are generally in use in woodworking are going to be OK after they cure. I would experiment with

oil terps varnish mix... because of the repairability issue in this kind of usage.

I use this kind of treatment on about everything I make, and I very much like the Variations in sheen that this method allows

Ron

Re: Baby Safe Finish

#3

Re: Baby Safe Finish

ThomD

>I would probably use somethng like Watco finish. It is baby safe after a few weeks. Another option for more surface build is Malooff finish which is 1 part boiled linseed, one part polymerising tung oil (the oil not a varnish using it), {so far this is edible} and one part flecto varathane valspar satin oil varnish. This is a great finish that I put on most simple furniture, looks like an oil and protects overall as well as varnish, at least as far as indoor use is concerned. It's applied, wipe on wipe off like an oil. It can be top coated with natural wax polish if desired. My own experience with cribs is that babies don't eat them anyway.

Another option is to just get a food safe finish. It's one of the jokes at our local turning club that people will ask "what is that great finish", and as often as not it turns out to be Lee Valley salad bowl finish. People have different ways of applying it...

If you design has a lot of little parts like spindles or slats, It is almost always easier to apply something oil like to it than to get a perfect surface from a varnish or lacquer, so back to my first two suggestions.

My favorite crib is a Simon Watts design, and the interior of it is fully fabric lined while the outside is cherry. Whole thing knocks down which is cool since babies don't spend long in a crib. This design is online somewhere, someone found it during an earlier discusion.

Re: Baby Safe Finish

#4

Maloof

roninkokomo

>Forgot to mention this one. Have use it several times with good result.

Re: Baby Safe Finish

#5

Re: Thanks, guys....Malooff it is.

Frank Mutchler

>

Re: Baby Safe Finish

#6

Re: Baby Safe Finish

Andrew Lunn

>Hi Frank,

Nice to meet you. I've used Tried and True Oil Varnish with very good results. It is non-toxic and imparts a very nice luster. Good luck.

Re: Baby Safe Finish

#7

Re: Baby Safe Finish *LINK*

Scott Burr in Ben Lomond, CA

>Hi Frank,

IMHO...

8^)


Oil