Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Don McConnell's dvd on the basics of molding

Posts

Don McConnell's dvd on the basics of molding

#1

Don McConnell's dvd on the basics of molding

Pam Niedermayer, Austin, TX

>Finally finished watching this last night and I learned several things. Among other things: what a fillet is; how plow, rebate, and moving filletster are used; how to take advantage of rebates; how to draw the form; and several other small, but vital techniques. This is well worth a look, even if you ultimately decide to draw the forms freehand. Thanks for the reference, Bjenk.

Pam

Re: Don McConnell's dvd on the basics of molding

#2

mouldings

paul womack

>Probably nice to have it in a one-stop "visual" form, but Don's already revealed the "secrets" on the various forums he writes for.

BugBear

Re: Don McConnell's dvd on the basics of molding

#3

Guess I don't get around that much.

Pam Niedermayer, Austin, TX

>

Re: Don McConnell's dvd on the basics of molding

#4

Have you seen it?

Adam Cherubini

>Have your seen it then, Bugbear?

Like you, I've read all of Don's posts. This video is pretty comprehensive. And I think there's an advantage in watching a guy actually work. I thought it was worthwhile and well done.

Only thing I would add is that the process seemed to take a long time and I didn't hear Don mention that. I wasn't sure if it really took that long or if there were multiple takes.

Also, for architectural work where multiple matching profiles are needed, the painstaking process of "rabbeting out" (I just made that term up) is helpful. But for this specific application, I would have freehanded the drawing and freehanded the planes. Starting with the rabbet at the top (which I may have plowed), I chisel or drawknife away the waste to form a bevel, then freehand the round plane, finish with the hollow. I'd like to say it's a 20 minute job, but I think that's probably light. It looked like he had 6' of Cherry.

If Don's reading, the HABS has Thomas Nevell's price book which shows moldings and includes Nevell's price per foot. Some of those big architectural moldings look like they were 2'/hour and more. So I think that supports the technique you were showing (and it's kind of a neat source).

Adam

Re: Don McConnell's dvd on the basics of molding

#5

mouldings

paul womack

>Have your seen it then, Bugbear?

Good Lord, no. I'm too cheap to buy it (even if it were available in the UK yet), and not unfluential enough to get it given to me free.

But I believe the process is fairly well written up in some of the old texts, and I've never heard Don claim any great innovations in the area.



Like you, I've read all of Don's posts. This video is pretty comprehensive. And I think there's an advantage in watching a guy actually work. I thought it was worthwhile and well done.


Yes, having everything "in one place" can only be helpful, and is of course easier for those that having followed Don "along the way", or have the "old texts" themselves. Some things like speed of stroke (which you can see) and the sonic feedback of a cut (which you can hear) are tricky to describe, although the better writers manage quite well. I remember a description of the correct force to adjust a wooden plane blade being the same as you'd use to drive a panel pin with a 4oz hammer; a clever analogy, redolent of experience.



Only thing I would add is that the process seemed to take a long time and I didn't hear Don mention that. I wasn't sure if it really took that long or if there were multiple takes.

Most videos are edited DOWN, not up.

Since AFAIK dvd pressing costs are constant, I'd be quite happy to have (perhaps in the "extras") some real time segments, boring though they might be.

BugBear

Re: Don McConnell's dvd on the basics of molding

#6

Re: Don McConnell's dvd on the basics of molding

Tony - Memphis

>I enjoyed it too. Very informative. Especially to someone like me to whom this info is mostly all new.

Tony

Re: Don McConnell's dvd on the basics of molding

#7

Re: Don McConnell's dvd on the basics of molding

Doug Reynolds in Seattle

>I had the good fortune of taking both Don's molding class and Larry Williams plane making class this June at Marc Adams School. It did not take very long to make the molding and what was especially useful was understanding how the technique could be readily adapted to virtually any profile that one needs to produce or reproduce. I make a lot of one-ofs so buying router bits or having knives cut to a specific profile is not cost effective. Plus, I enjoy the process of hand planning much more than the speed of the router.

Re: Don McConnell's dvd on the basics of molding

#8

Re: Don McConnell's dvd on the basics of molding

Pam Niedermayer, Austin, TX

> I enjoy the process of hand planning much more than the speed of the router.

I'm not even sure a router is that much faster, given that it always takes two or three passes to cut while protecting the delicate bits and router itself.

Pam