Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

sealing in old paint(OT?)

Posts

sealing in old paint(OT?)

#1

Jack Guzman from Maine

sealing in old paint(OT?)

Jack Guzman from Maine

>I have an old clock dial that has it's original paint flaking off.I like the look of it as is with about a third of the paint gone.The numbers are still quite readable.I want to stop the flaking process somehow and preserve what's left as is. Does anyone know of a way I can do this? This is a Seth Thomas schoolhouse clock that was missing the lower door and the bezel and glass over the dial.I built a new lower door and bought a new bezel.I am fuming the bezel right now to age the brass a bit.The clock is worth preserving and fixing. The original movement runs great.Thanks.---Jack

Re: sealing in old paint(OT?)

#2

a guess

Bill Tindall, E.TN

>Firtst.... a not guessing approach. I would go to a high end antique store and ask who they recommend for restorations/conservation and ask there. Or call a museum conservation department and ask. The folks at Philly are nice.

If I could not get any authoritative information I would make a guess and spray it with clear acrylic. The acrylic will remain water white and be somewhat invisible over the original paint.

Re: sealing in old paint(OT?)

#3

Re: sealing in old paint(OT?)

ThomD

>The preservation route will likely involve not touching it. Coating it won't do that much for the wood coating bond, and you will have another layer on it. Though I agree with Bill it might help hold it together for a while. I don't know of anything that penetrates through a finish to restore it's adhesion.

What is your best guess as to whether the paint is toxic to start with?

Re: sealing in old paint(OT?)

#4

Jack Guzman from Maine

toxic

Jack Guzman from Maine

>I have no idea about toxicity.This is a metal dial that was painted by the Seth Thomas clock company around the turn of the century or the early 1900s.I have no idea what they used for paint.---Jack

Re: sealing in old paint(OT?)

#5

Jack Guzman from Maine

Re: a guess

Jack Guzman from Maine

>I'm going to get some acrylic spray and test it on something similar.That may be the way to go.I think most preservationists would call this dial a loss.It's not a particularly rare piece and it's pretty far gone but I like the way it looks.The case is oak that has darkened quite a bit with age.I think a new dial would ruin the look.I managed to stain the lower door to get it pretty close to the rest of the case.Thanks---Jack

Re: sealing in old paint(OT?)

#6

Re: sealing in old paint(OT?)

James Watriss

>Having read all the responses so far...

I think the acrylic is one way to go, but I think I might go with a spray shellac instead. It's a gut level thing, and not necessarily based on anything empirical in nature, but one of the things I heard time and again is that shellac sticks to pretty much anything. It also means that if you lose any significant flakes in the process, a little DN alcohol will help you give it another go.

One other thing to consider with this whole process though, (with acrylic, shellac, or pretty much anything else that sprays) is that it will do more than just hold the paint to the dial. It's going to put a shine on the existing paint, and I think that if the old, weathered, wabi sabi* kind of look is really what's attracting you to this dial, that having a nice shiny coating of ANYTHING on top will add luster and take away from the appeal. I would suggest finding a worthy project that will involve this dial, and keep it under glass.

If you can't find a way to preserve it perfectly the way it is... and such a process would surely have never allowed the dial to get to where it is today... then perhaps you would be better served by putting it on display in a way that protects its condition, but will allow it to continue on its current course. In this way, you're not disrupting or interrupting the process that allowed it to age so gracefully thus far.

I think the very idea of a time piece whose condition shows a much longer passage of time is a truly awesome sounding thing. But maybe... just maybe... stopping the effect that time has had on your clock, isn't quite what you're going for. (Though I can certainly relate to wanting good things to last forever.)

* For those of you unfamiliar with the term... and I'm only loosely familiar with the concept myself, wabi sabi is a japanese term, the translation of which I won't attempt, and can't completely remember. But the philosophy is one that honors and respects the inevitability of age, decline, and the poignant sadness that comes with the passing of all things. There's nothing disrespectful, after all, in allowing nature to take its course.

Old barn doors, streaked with rust stains from rain hitting the nails, are a good example. The cracked and weathered wood shows the age of the doors, and the passing of time, and gracefully so. And there's a certain dignity to old stone statues with a few chips and cracks, and a little discoloration from sap and birds and vines. I'm not saying your old clock face is tantamount to a time worn and almost forgotten temple. But I'm not saying it's not, either.

Best of luck, however you approach it. I'd like to hear more when you figure out how to handle this object.

Re: sealing in old paint(OT?)

#7

Re: toxic

Bill Houghton, Sebastopol, CA

>As I read through my collection of old Popular Mechanics Shop Notes from after the turn of that century, I am amazed at the casual and frequent usage of various lead compounds (I was familiar with white and red, but black was a new one to me), as well as mercury, cyanide, etc. I think you need to assume whatever paint is on there is toxic.

Encapsulation is often considered an adequate protection for certain toxic materials, so you may get double benefit if you can find a material that fixes the paint firmly to the dial.

Suggestion: in addition to conservators, you might contact the best art supply store in your area. They probably deal with similar issues from artists.

Re: sealing in old paint(OT?)

#8

Jack Guzman from Maine

Re: sealing in old paint(OT?)

Jack Guzman from Maine

>Thanks for the input James.Food for thought. When I'm finished I'll post a picture of the completed clock.---Jack

Re: sealing in old paint(OT?)

#9

Shooting from the hip here...

Scott Burr in Ben Lomond, CA

>I don't know how much of a priceless piece it is...

Shellac! spray or brush it's going to be as close as to what was used on it to begin with.

Scott, Bowing out of any repercussions...

But, Hey it will work...

Re: sealing in old paint(OT?)

#10

wabi sabi *LINK*

Greg B�tit Crown Point NY

>This thread reminds me of a book that Dave Sawyer recommended to me:


The Same Axe, Twice