Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Tell me about this Pexto Brace

Posts

Tell me about this Pexto Brace

#1

Tell me about this Pexto Brace

Dominic in Buck's County PA

>Hi gang,

I picked up this Pexto ratcheting brace at a Flea Market last weekend. I measured the depth at 6". So I assume it's a 12" brace. I paid around $6 for it (or was it $8? It slips my mind at the moment)

Anyway, it looks like the handles are rosewood and it operates like it was new. The ratcheting mechanism operates and sounds like it have a very positive action.

Photobucket

Photobucket

I did a search on Pexto and learned about some of the company history. But I didn't find much on their braces. How are they regarded? It feels like a very substantial tool. I'd like to hear from people who've used or collected them.

See ya around,

Dominic

Re: Tell me about this Pexto Brace

#2

Re: Tell me about this Pexto Brace

Richard Jones

>Dom,

Good looking brace, looks exactly like an old M-F that I have, would almost wonder if they were made by the same company.......

Oh, by the way, I'll give you $9 for it(don't want to see you lose money on the deal), and I'll pay shipping.........:)

Rich in VA

Re: Tell me about this Pexto Brace

#3

Re: Tell me about this Pexto Brace

Charles

>It'll drill holes; what else do you need to know?

Re: Tell me about this Pexto Brace

#4

Re: Tell me about this Pexto Brace

Bill Houghton, Sebastopol, CA

>Nice clean brace.

LIGHTLY oil under the knob, at the base of the rotating part, and where the chuck spindle rotates. Other than that, it shouldn't need much maintenance.

As Charlie says, unless you get into collector type study of braces, there's not a lot to know about the brace itself. My test for condition is always how much, if any, wobble exists when a bit is tightened down in the chuck. Wobble can occasionally be worn-out chuck jaws (I dumped a non-ratcheting brace because of that), but is more often, in ratcheting braces, a matter of wear in the rotating spindle. Huge amounts of wobble waste your energy, though less so than with eggbeater drills because the speed is slower.

In my opinion, the heavy slippery slope is in bits - solid center (sometimes called "Irwin," usually coarse threads on the lead screw and thus optimized for softwood and carpenters) vs. Jennings (fine-threaded lead screws and thus optimized for hardwoods) is just the beginning.

Bill, not exactly a collector - only about ten braces and only three sets of bits (one incomplete) - but I could probably play one on television.

Re: Tell me about this Pexto Brace

#5

Re: Tell me about this Pexto Brace------WebKitForm *LINK*

Wiley Horne-- So. Calif.------WebKitFormBoundaryQB

>Hi Dominic,

If you want to speak with an expert, write Sandy Moss of Sandy's Tools fame. He has a brace collection and much knowledge. A link to his brace collection is down below--read intro. and then maybe go click on Peck, Stow, and Wilcox (Peck, Stow = Pexto, get it). Earlier braces by Peck, Stow, and Wilcox were marked 'PS & W', if I recall correctly.

I have a few Pextos and PS&W's, and they are first-rate tools, made in the day when folks used braces. The wood on mine does appear to be a tropical hardwood, dunno what.

The higher end Pexto/PSW's had the 'Samson' chuck, a ball-bearing chuck which I believe preceded the Millers Falls 'Lion' chuck (somebody please correct this if I'm wrong), but in any event was competitive with it, along with the North Bros. ball-bearing chuck.

Anyway, Pexto and PS&W are highly regarded marks among the cognoscenti.

Wiley


Sandy Moss' Brace Collection