Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

#78 Fence Question

Posts

#78 Fence Question

#1

#78 Fence Question

Tony - Memphis

>I bought a 78 quite a while ago. Nice unit. Good shape and works pretty good. I just happened to notice that the fence moves around a bit and when I was investigating, I noticed that the tab on the fence doesn't fit into the groove on the body of the plane. I'm talking about the vertical groove/slot/whatever that should keep the fence from rotating. Any chance I have the wrong fence? I broke the fence knob a while back and got another one from St James.

Thanks,

Tony

Re: #78 Fence Question

#2

Oops - depth stop

Tony - Memphis

>That'd be the depth stop, not the fence.

Re: #78 Fence Question

#3

Jack Guzman from Maine

Re: Oops - depth stop

Jack Guzman from Maine

>I just noticed something similar.I bought a box of plane parts this weekend and it had a depth stop in it.I tried it on one of my 78s and the groove lined up nicely.On another it didn't. I'm not sure if it's an older model or what. I have to explore it a little further.

That box of parts contained two nice clean 9 1/2 stanley block plane bodies in good shape with full japanning but no caps or irons.Anyone interested in trading a good bed for a lever cap and iron?---Jack

Re: #78 Fence Question

#4

Re: #78 Fence Question

Bill Houghton, Sebastopol, CA

>I bought a new depth stop from Stanley, which came slathered with a lot of paint, and the depth stop didn't fit well until I wire-brushed most of the paint off. Could this be the issue?