Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

In Spite of all of the good information...

Posts

In Spite of all of the good information...

#1

In Spite of all of the good information...

Stephen Shepherd in the State of Deseret

>that I was provided and following directions to the letter I still managed to break something.

Well I put that big moment on the steel and heard it happen. The socket came loose at its weld.

All is not lost as it was much easier to fit up a handle. When I do this again I will sacrifice the handle (I think).

Stephen


img

Re: In Spite of all of the good information...

#2

That's what is supposed to happen, Stephen,

Wiley Horne-- So. Calif.

>it isn't a socket. That is a tapered ferrule above the bolster. You did it exactly right.

Wiley

Re: In Spite of all of the good information...

#3

Re: In Spite of all of the good information...

wilbur

>Actually, that's how the chisel is put together. The "socket" is a ferrule that fits to that part of the chisel. I have to admit, though, I don't know off the top of my head if the ferrule is welded to the main blade or not.

Re: In Spite of all of the good information...

#4

Now you tell me!.

Stephen Shepherd in the State of Deseret

>I could barely make out the line which I thought was a weld line, I had seen another post elsewhere. So I don't feel bad now and am on my way to having a Western style laid steel chisel.

The handle doesn't have any linseed oil on it yet, it is actually quite curly.

Thanks for all your help.

Stephen


img

Re: In Spite of all of the good information...

#5

Re: Now you tell me!.

Dean J in MN

>You're most of the way to a Western tool. Now if it weren't so darn thick we'd have something.

-Dean

Re: In Spite of all of the good information...

#6

Re: Now you tell me!.

ThomD

>That is why it can be difficult to get back together, because they grind that junction, or so it appears, and it doesn't always settle back in there.

Re: In Spite of all of the good information...

#7

The blade or the handle?

Stephen Shepherd in the State of Deseret

>I think the handle might be a bit thick, but I like a big end. As for the blade, the top is soft enough to cut with a file, so my very slow hand grinder could reduce its thickness, not a bad idea. I could also remove the non-Western lettering.

If sombody offered a rough blank, I would buy some.

Stephen

Re: In Spite of all of the good information...

#8

Re: The blade or the handle?

Dean J in MN

>I like the handle, I was speaking to the fat blade. Let me know when you have it ~1/16" at the start of the bevel.

-Dean

Re: In Spite of all of the good information...

#9

Re: Now you tell me!.

Tony Z.

>Now exactly what is it you are after (said tongue in cheek remembering your post when you first bought the chisel for the laminated steel).

T.Z.