Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

New Dovetail Vise Idea *LINK*

Posts

New Dovetail Vise Idea *LINK*

#1

New Dovetail Vise Idea *LINK*

Hank Knight

>A couple of years ago, I posted about the dovetial vise I built into my bench. I imbedded several 1/2" X 13 machinists "T" nuts in my dog hole strip and use threaded studs with speed handles and a hardwood "jaw" to clamp flat stock to the face of my bench.

Photobucket

The idea prompted a lot of nice comments. The problem with the design is that it was hard to retrofit an existing bench with the heavy threaded inserts needed for a vise. Lee valley has solvesd that problem with their new "Bench Anchor."

Veritas Bench Anchor

Their catalog explains how it works it better than I can (see link below).

With the Bench anchor, all you need is two 3/4" holes in the front face of your bench top, two 1/2 X 13 threaded studs, two aluminum speed handles and a hardwood jaw. I've tried it with the Bench anchors and it works great. Easy peasy. Plus the Bench anchors can be removed by simply unscrewing the internal screw and pulling them out. I've used my dovetail vise a lot. It's perfect for sawing dovetails, for marking the second pins or tails board (depending on whether you're a "pins first" or a "tails first" person) and it's handy for some assembly operations too. Now, with this great new Lee Valley product, you can add one to your bench at any time.

Hank


Veritas Bench Anchor

Re: New Dovetail Vise Idea *LINK*

#2

Re: New Dovetail Vise Idea

Neal in San Jose

>I did something similar but more flexible on the front of my bench. Instead of a series of nuts, I routed a groove and installed a length on "T" track. I've made all sorts of jigs and holders that attach to the "T" track, and I like the fact that it doesn't matter what size the jig is because I can fasten anywhere along the track. I wish I could claim this as an original idea, but I saw it somewhere (don't remember where).

Re: New Dovetail Vise Idea *LINK*

#3

Re: New Dovetail Vise Idea

"RJ" Whelan

>Hank ... where did you find the aluminum "speed handles"?

Re: New Dovetail Vise Idea *LINK*

#4

Re: Aluminum 'Speed *LINK*

Bob Entwisle in NJ

>I found these at McMaster-Carr, scroll down to the bottom of the page in the link.


http://www.mcmaster.com/#catalog/114/2168

Re: New Dovetail Vise Idea *LINK*

#5

Yet another reason not to own a sjoberg elite

James Watriss

>Stupid 1" dog holes.

Re: New Dovetail Vise Idea *LINK*

#6

Re: New Dovetail Vise Idea

Joel

>I just clamp one side of the board in my vise and the other side using either a bar clamp across the top or when I didn't have clearance a c clamp to the apron of my bench. You don't need the bar across the work - it gets held rock solid in the vice anyway.

Re: New Dovetail Vise Idea *LINK*

#7

Re: New Dovetail Vise Idea

Hank Knight

>RJ,

I got my aluminum speed handles from MSC Industrial Supply (www.mscdirect.com), but the ones from McMaster Carr look similar, if not identical. I also used an extra large heavy duty washer under the speed handle to distribute the force on the hardwood jaw.

Hank

Re: New Dovetail Vise Idea *LINK*

#8

Re: New Dovetail Vise Idea

Stuart Hough

>I like that concept, Hank. With your permission I will use that when I build my own bench. Thanx for the post.

Re: New Dovetail Vise Idea *LINK*

#9

why not plug a few

Ian (in Sydney, Australia)

>em with 1" dowel and then drill the dowel out with a 3/4 bit?

Re: New Dovetail Vise Idea *LINK*

#10

Re: why not plug a few

James Watriss

>Clearly I could. I'm simply whining about the fact that such an expensive bench requires any work to make it compatible with most of the aftermarket stuff out there. (aftermarket dogs, holdfasts, etc, etc)

Re: New Dovetail Vise Idea *LINK*

#11

Re: New Dovetail Vise Idea

Hank Knight

>Stuart,

I'm glad you like the idea and please use it if you like. I'm not claiming any ownership of the idea so you certainly don't need my permission to use it. I have photos of my original installation I would be glad to share if you would like them. They have been posted here before, but if you want them and can't find them, e-mail me and I'll send them to you. Actually, I think the Lee Valley Bench Anchors are plenty stout enough for this application and they are a LOT easier than imbedding T nuts in the bench top like I did.

Hank

Re: New Dovetail Vise Idea *LINK*

#12

Re: New Dovetail Vise Idea

Ernie Miller

>I built mine very simular to yours but I drilled holes and chiseled in or captured 5/8 squair nuts for the bolts ot be captured by. you idea seems a little easier

Re: New Dovetail Vise Idea *LINK*

#13

Re: New Dovetail Vise Idea

"RJ" Whelan

>Thank you ....

Re: New Dovetail Vise Idea *LINK*

#14

Re: Aluminum 'Speed

"RJ" Whelan

>Thank you Bob ... now if you'll just order them for me, pay for them and install them in my bench I'll have a new DT vise with absolutely no effort on my part. That's almost as good a deal as the departing CEO of WAMU ($19 mil for 3 weeks work) ..... :-)