The reason for the saw nib.
Bill Tindall, E.TN
>As related by Allan Batty during class. Someone noticed a bit of relief ground from the tip of Allan's skew and asked about it. Turned out it was to prevent a rub mark on the end grain whilst making a cubic element on a spindle on a period turning (orthogonal end grain cut). (I don't remember the period as it was a minor one that I was not fond of). Allan went on to comment that things like the reason for this tool feature get lost with time. Because these kinds of spindles are seldom done now days the apprentices no longer make this relief on the skew. He went on to make the analogy with saw nibs. The Diston representative would come around to the tradesmen and demonstrate how a Diston saw could be bent with the end tucked through the handle without damage to the saw blade. Debate raged at times as to the purpose of the saw nib on the older saws (sound familiar). All the current theories were popular then too. So one day someone at the shop rung up the current Mr. Diston and asked, "what is the purpose of the saw nib"? "We don't know" was the reply.



